Merge pull request #15 from sfwtw/main

feat: Added support for Simcom devices, added FM350-GL soft reboot su…

luci/luci-app-qmodem/root/etc/init.d/qmodem_reboot

@@ -0,0 +1,39 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+USE_PROCD=1
+
+START=95
+STOP=0
+
+start_service() {
+	:
+}
+
+stop_service() {
+	procd_set_param timeout 30
+	config_load qmodem
+	config_foreach _reboot_usb modem-device
+	
+}
+
+_reboot_usb() {
+	config_get data_interface $1 data_interface
+	if [ "$data_interface" == "usb" ]; then
+		config_get name $1 name
+		if [ "$name" == "fm350-gl" ]; then
+			config_get at_port $1 at_port
+			response=$(tom_modem -d "$at_port" -o a -c "AT+CFUN=1,1")
+			retries=3
+			while ! echo "$response" | grep -qi "ok" && [ $retries -gt 0 ]; do
+				sleep 1
+				response=$(tom_modem -d "$at_port" -o a -c "AT+CFUN=1,1")
+				retries=$((retries - 1))
+			done
+			max_retries=15
+    	while [ -e "/dev/$at_port" ] && [ $max_retries -gt 0 ]; do
+        	sleep 1
+        	max_retries=$((max_retries - 1))
+    	done
+		fi
+	fi
+}

luci/luci-app-qmodem/root/usr/share/qmodem/modem_ctrl.sh

@@ -23,6 +23,9 @@ case $vendor in
     "sierra")
         . /usr/share/qmodem/vendor/sierra.sh
         ;;
+    "simcom")
+        . /usr/share/qmodem/vendor/simcom.sh
+        ;;
     *)
         . /usr/share/qmodem/generic.sh
         ;;

luci/luci-app-qmodem/root/usr/share/qmodem/modem_dial.sh

@@ -270,22 +270,35 @@ check_ip()
                         ;;
                     "mediatek")
                         check_ip_command="AT+CGPADDR=3"
-                        mtk=1
                         stric=1
                         ;;
                 esac
                 ;;
+            "simcom")
+                case $platform in
+                    "qualcomm")
+                        check_ip_command="AT+CGPADDR=6"
+                        ;;
+                esac
+                ;;
         esac
         ipaddr=$(at "$at_port" "$check_ip_command" |grep +CGPADDR:)
         if [ -n "$ipaddr" ];then
-            if [ $mtk -eq 1 ] && [ "$pdp_type" = "IPv4v6" ];then
-                if ! ping -c 2 -w 5 2400:3200::1 > /dev/null 2>&1; then
-                    m_debug "ipv6 is down,try to restart"
-                    ifdown "$interface"V6 && sleep 2 && ifup "$interface"V6
+            if [ $mtk -eq 1 ] && echo "$ipv4_config" | grep -qE '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$'; then
+                if [ "$pdp_type" = "IPv4v6" ];then
+                    if ! ping -c 2 -w 5 2400:3200::1 > /dev/null 2>&1; then
+                        m_debug "ipv6 is down,try to restart"
+                        ifdown "$interface"V6 && sleep 2 && ifup "$interface"V6
+                    fi
                 fi
             fi
             ipv6=$(echo $ipaddr | grep -oE "\b([0-9a-fA-F]{0,4}:){2,7}[0-9a-fA-F]{0,4}\b")
             ipv4=$(echo $ipaddr | grep -oE "\b([0-9]{1,3}\.){3}[0-9]{1,3}\b")
+            if [ "$manufacturer" = "simcom" ];then
+                ipv4=$(echo $ipaddr | grep -oE "\b([0-9]{1,3}\.){3}[0-9]{1,3}\b" | grep -v "0\.0\.0\.0" | head -n 1)
+                ipaddr=$(echo $ipaddr | sed 's/\./:/g' | sed 's/+CGPADDR: //g' | sed 's/'$ipv4',//g')
+                ipv6=$(echo $ipaddr | grep -oE "\b([0-9a-fA-F]{0,4}.){2,7}[0-9a-fA-F]{0,4}\b")
+            fi
             disallow_ipv4="0.0.0.0"
             #remove the disallow ip
             if [ "$ipv4" == *"$disallow_ipv4"* ];then
@@ -768,7 +781,15 @@ at_dial()
                     ;;
             esac
             ;;
-            
+        "simcom")
+            case $platform in
+                "qualcomm")
+                    local cnmp=$(at ${at_port} "AT+CNMP?" | grep "+CNMP:" | sed 's/+CNMP: //g' | sed 's/\r//g')
+                    at_command="AT+CNMP=$cnmp;+CNWINFO=1"
+                    cgdcont_command="AT+CGDCONT=1,\"IPV4V6\",\"$apn\""
+                    ;;
+            esac
+            ;;
     esac
     m_debug "dialing vendor:$manufacturer;platform:$platform; $cgdcont_command ; $at_command"
     at "${at_port}" "${cgdcont_command}"
@@ -949,7 +970,7 @@ at_dial_monitor()
             fi
             sleep 10
         else
-        #检测ipv4是否变化
+            #检测ipv4是否变化
             sleep 15
             if [ "$ipv4" != "$ipv4_cache" ];then
                 handle_ip_change

luci/luci-app-qmodem/root/usr/share/qmodem/modem_support.json

@@ -1,4 +1,5 @@
-{ "modem_support": {
+{
+    "modem_support": {
         "usb": {
             "em05": {
                 "manufacturer_id": "2c7c",
@@ -469,6 +470,17 @@
                     "mbim",
                     "rmnet"
                 ]
+            },
+            "simcom_d8200g": {
+                "manufacturer_id": "1a0e",
+                "manufacturer": "simcom",
+                "platform": "qualcomm",
+                "data_interface": "usb",
+                "define_connect": "1",
+                "modes": [
+                    "qmi",
+                    "rndis"
+                ]
             }
         },
         "pcie": {
@@ -755,6 +767,17 @@
                         "4d59"
                     ]
                 }
+            },
+            "simcom": {
+                "qualcomm": {
+                    "vendor_id": [
+                        "1a0e"
+                    ],
+                    "product_id": [
+                        "9001",
+                        "9011"
+                    ]
+                }
             }
         }
     }

luci/luci-app-qmodem/root/usr/share/qmodem/modem_util.sh

@@ -112,7 +112,23 @@ at_get_slot()
 				;;
 			esac
 			;;
-			
+		"simcom")
+			at_res=$(at $at_port AT+SMSIMCFG? | grep "+SMSIMCFG:" | awk -F',' '{print $2}' | sed 's/\r//g')
+			case $at_res in
+				"1")
+					sim_slot="1"
+					;;
+				"2")
+					sim_slot="2"
+					;;
+				*)
+					sim_slot="1"
+					;;
+			*)
+				sim_slot="1"
+				;;
+			esac
+			;;
 		*)
 			at_q_res=$(at $at_port AT+QSIMDET? |grep +QSIMDET: |awk -F: '{print $2}')
 			at_f_res=$(at $at_port AT+GTDUALSIM? |grep +GTDUALSIM: |awk -F: '{print $2}')