添加解决5G模块V6下发问题的插件

luci-app-hypermodem/Makefile

@@ -0,0 +1,23 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+LUCI_TITLE:=Hyper Modem Server
+LUCI_DEPENDS:=+luci-compat +kmod-usb-net  +kmod-usb-net-cdc-ether +kmod-usb-acm \
+		+kmod-usb-net-qmi-wwan  +kmod-usb-net-rndis +kmod-usb-serial-qualcomm \
+		+kmod-usb-net-sierrawireless +kmod-usb-ohci +kmod-usb-serial \
+		+kmod-usb-serial-option +kmod-usb-wdm \
+		+kmod-usb2 +kmod-usb3 \
+		+kmod-usb-net-cdc-mbim \
+		+kmod-qmi_wwan_q \
+		+kmod-pcie_mhi +pciutils \
+		+quectel-CM-5G \
+
+include $(TOPDIR)/feeds/luci/luci.mk
+
+# call BuildPackage - OpenWrt buildroot signature

luci-app-hypermodem/README.md

@@ -0,0 +1,3 @@
+# luci-app-hypermodem
+
+支持USB和PCIE两种连接模式的5G模块进行IPv6拨号，然后下发给内网设备

luci-app-hypermodem/luasrc/controller/hypermodem.lua

@@ -0,0 +1,9 @@
+module("luci.controller.hypermodem", package.seeall)
+
+function index()
+	if not nixio.fs.access("/etc/config/hypermodem") then
+		return
+	end
+
+	entry({"admin", "network", "hypermodem"}, cbi("hypermodem"), _("Hyper Modem Server"), 80).dependent = false
+end

luci-app-hypermodem/luasrc/model/cbi/hypermodem.lua

@@ -0,0 +1,48 @@
+-- Copyright 2016 David Thornley <david.thornley@touchstargroup.com>
+-- Licensed to the public under the Apache License 2.0.
+
+mp = Map("hypermodem")
+mp.title = translate("Hyper Modem Server")
+mp.description = translate("Modem Server For OpenWrt")
+
+s = mp:section(TypedSection, "service", "Base Setting")
+s.anonymous = true
+
+enabled = s:option(Flag, "enabled", translate("Enable"))
+enabled.default = 0
+enabled.rmempty = false
+
+ipv6 = s:option(Flag, "ipv6", translate("Enable IPv6"))
+ipv6.default = 1
+ipv6.rmempty = false
+
+device = s:option(Value, "device", translate("Modem device"))
+device.rmempty = false
+
+local device_suggestions = nixio.fs.glob("/dev/cdc-wdm*")
+
+if device_suggestions then
+	local node
+	for node in device_suggestions do
+		device:value(node)
+	end
+end
+
+apn = s:option(Value, "apn", translate("APN"))
+apn.rmempty = true
+
+username = s:option(Value, "username", translate("PAP/CHAP username"))
+username.rmempty = true
+
+password = s:option(Value, "password", translate("PAP/CHAP password"))
+password.rmempty = true
+
+auth = s:option(Value, "auth", translate("Authentication Type"))
+auth.rmempty = true
+auth:value("", translate("-- Please choose --"))
+auth:value("both", "PAP/CHAP (both)")
+auth:value("pap", "PAP")
+auth:value("chap", "CHAP")
+auth:value("none", "NONE")
+
+return mp

luci-app-hypermodem/po/zh-cn/hypermodem.po

@@ -0,0 +1,24 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Last-Translator: momokind <momokind2002@gmail.com>\n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: zh_CN\n"
+"X-Generator: Poedit 2.3.1\n"
+
+msgid "Base Setting"
+msgstr "基本设置"
+
+msgid "Hyper Modem Server"
+msgstr "超级移动网络拨号服务"
+
+msgid "Modem Server For OpenWrt"
+msgstr "OpenWrt移动网络拨号服务"
+
+msgid "Enable IPv6"
+msgstr "启用IPv6协商"

luci-app-hypermodem/root/etc/config/hypermodem

@@ -0,0 +1,5 @@
+config service
+	option device '/dev/cdc-wdm0'
+	option ipv6 '1'
+	option enabled '0'
+

luci-app-hypermodem/root/etc/init.d/hypermodem

@@ -0,0 +1,122 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006-2014 OpenWrt.org
+
+START=94
+STOP=13
+USE_PROCD=1
+
+pre_set()
+{
+	[ "$(uci get network.wan.ifname)" != "$1" ] && {
+		uci set network.wwan='interface'
+		uci set network.wwan.ifname="$1"
+		uci set network.wwan.proto='dhcp'
+		if [ "$ipv6" = 1 ]; then
+			uci set network.wwan6='interface'
+			uci set network.wwan6.ifname="$1"
+			uci set network.wwan6.proto='dhcpv6'
+			uci set network.wwan6.extendprefix='1'
+		fi
+		uci commit network
+
+		num=`uci show firewall |grep "name='wan'" |wc -l`
+		wwan_num=`uci get firewall.@zone[$num].network |grep -w wwan |wc -l`
+		wwan6_num=`uci get firewall.@zone[$num].network |grep -w wwan6 |wc -l`
+		if [ "$wwan_num" = "0" ]; then
+			uci add_list firewall.@zone[$num].network='wan'
+		fi
+		if [ "$ipv6" = 1 ]; then
+			if [ "$wwan6_num" = "0" ]; then
+				uci add_list firewall.@zone[$num].network='wwan6'
+			fi
+		fi
+		uci commit firewall
+
+		ifup wwan
+		if [ "$ipv6" = 1 ]; then
+			ifup wwan6
+		fi
+	}
+
+	[ "$(uci get network.wan6.ifname)" == "$1" ] && {
+		uci set network.wan6.extendprefix='1'
+		uci commit network
+	}
+}
+
+run_dial()
+{
+	local enabled
+	config_get_bool enabled $1 enabled
+
+	if [ "$enabled" = "1" ]; then
+		local apn
+		local user
+		local password
+		local auth
+		local ipv6
+		local device
+
+		config_get apn $1 apn
+		config_get user $1 user
+		config_get password $1 password
+		config_get auth $1 auth
+		config_get ipv6 $1 ipv6
+		config_get device $1 device
+
+		devname="$(basename "$device")"
+		devicepath="$(find /sys/class/ -name $devname)"
+		devpath="$(readlink -f $devicepath/device/)"
+		ifname="$( ls "$devpath"/net )"
+
+		procd_open_instance
+		procd_set_param command quectel-CM
+		if [ "$ipv6" = 1 ]; then
+			procd_append_param command -4 -6
+		fi
+		if [ "$apn" != "" ];then
+			procd_append_param command -s $apn
+		fi
+		if [ "$user" != "" ]; then
+			procd_append_param command $user
+		fi
+		if [ "$password" != "" ]; then
+			procd_append_param command $password
+		fi
+		if [ "$auth" != "" ]; then
+			procd_append_param command $auth
+		fi
+		if [ "$device" != "" ]; then
+			procd_append_param command -i $ifname
+		fi
+		procd_set_param respawn
+		procd_close_instance
+
+		if [ -d /sys/class/net/rmnet_mhi0 ]; then
+			pre_set rmnet_mhi0.1
+		elif [ -d /sys/class/net/wwan0_1 ]; then
+			pre_set wwan0_1
+		elif [ -d /sys/class/net/wwan0.1 ]; then
+			pre_set wwan0.1
+		elif [ -d /sys/class/net/wwan0 ]; then
+			pre_set wwan0
+		fi
+	fi
+
+	sleep 15
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger "hypermodem"
+}
+
+start_service() {
+	config_load hypermodem
+	config_foreach run_dial service
+}
+
+stop_service()
+{
+	killall quectel-CM >/dev/null 2>&1
+}

luci-app-hypermodem/root/etc/uci-defaults/luci-hypermodem

@@ -0,0 +1,11 @@
+#!/bin/sh
+
+uci -q batch <<-EOF >/dev/null
+	delete ucitrack.@hypermodem[-1]
+	add ucitrack hypermodem
+	set ucitrack.@hypermodem[-1].init=hypermodem
+	commit ucitrack
+EOF
+
+rm -f /tmp/luci-indexcache
+exit 0