#!/bin/sh
# Copyright (C) 2023 Siriling <siriling@qq.com>

#脚本目录
SCRIPT_DIR="/usr/share/modem"

#运行目录
MODEM_RUNDIR="/var/run/modem"

#导入组件工具
source "${SCRIPT_DIR}/modem_debug.sh"

#重设网络接口
# $1:AT串口
# $4:连接定义
# $5:模组序号
reset_network_interface()
{
    local at_port="$1"
    local define_connect="$2"
    local modem_no="$3"

    local interface_name="wwan_5g_${modem_no}"
    local interface_name_ipv6="wwan6_5g_${modem_no}"

    #获取IPv4地址
    at_command="AT+CGPADDR=${define_connect}"
    local ipv4=$(at ${at_port} ${at_command} | grep "+CGPADDR: " | awk -F',' '{print $2}' | sed 's/"//g')
    #输出日志
    # echo "[$(date +"%Y-%m-%d %H:%M:%S")] Get Modem new IPv4 address : ${ipv4}" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"

    #获取DNS地址
    dns=$(fibocom_get_dns ${at_port} ${define_connect})
    local ipv4_dns1=$(echo "${dns}" | jq -r '.dns.ipv4_dns1')
    local ipv4_dns2=$(echo "${dns}" | jq -r '.dns.ipv4_dns2')
    #输出日志
    echo "[$(date +"%Y-%m-%d %H:%M:%S")] Get Modem IPv4 DNS1: ${ipv4_dns1}" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"
    echo "[$(date +"%Y-%m-%d %H:%M:%S")] Get Modem IPv4 DNS2: ${ipv4_dns2}" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"
    
    #比较的网络接口中的IPv4地址
    local ipv4_config=$(uci -q get network.${interface_name}.ipaddr)
    if [ "$ipv4_config" == "$ipv4" ]; then
        #输出日志
        echo "[$(date +"%Y-%m-%d %H:%M:%S")] IPv4 address is the same as in the network interface, skip" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"
    else
        #输出日志
        echo "[$(date +"%Y-%m-%d %H:%M:%S")] Reset network interface ${interface_name}" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"

        #设置静态地址
        uci set network.${interface_name}.proto='static'
        uci set network.${interface_name}.ipaddr="${ipv4}"
        uci set network.${interface_name}.netmask='255.255.255.0'
        uci set network.${interface_name}.gateway="${ipv4%.*}.1"
        uci set network.${interface_name}.peerdns='0'
        uci -q del network.${interface_name}.dns
        uci add_list network.${interface_name}.dns="${ipv4_dns1}"
        uci add_list network.${interface_name}.dns="${ipv4_dns2}"
        uci commit network
        service network reload

        #输出日志
        echo "[$(date +"%Y-%m-%d %H:%M:%S")] Reset network interface successful" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"
    fi
}

#GobiNet拨号
# $1:AT串口
# $2:制造商
# $3:连接定义
gobinet_dial()
{
    local at_port="$1"
    local manufacturer="$2"
    local define_connect="$3"

    #激活
    local at_command="AT+CGACT=1,${define_connect}"
    #打印日志
    dial_log "${at_command}" "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"

    at "${at_port}" "${at_command}"

    #拨号
    local at_command
    if [ "$manufacturer" = "quectel" ]; then
        at_command='ATI'
    elif [ "$manufacturer" = "fibocom" ]; then
        at_command='AT$QCRMCALL=1,3'
    else
        at_command='ATI'
    fi

    #打印日志
    dial_log "${at_command}" "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"

    at "${at_port}" "${at_command}"
}

#ECM拨号
# $1:AT串口
# $2:制造商
# $3:连接定义
ecm_dial()
{
    local at_port="$1"
    local manufacturer="$2"
    local define_connect="$3"

    #激活
    # local at_command="AT+CGACT=1,${define_connect}"
    # #打印日志
    # dial_log "${at_command}" "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"

    # at "${at_port}" "${at_command}"

    #拨号
    at_command
    if [ "$manufacturer" = "quectel" ]; then
        at_command="AT+QNETDEVCTL=${define_connect},3,1"
    elif [ "$manufacturer" = "fibocom" ]; then
        at_command="AT+GTRNDIS=1,${define_connect}"
    else
        at_command='ATI'
    fi

    #打印日志
    dial_log "${at_command}" "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"

    at "${at_port}" "${at_command}"

    sleep 2s
}

#RNDIS拨号
# $1:AT串口
# $2:制造商
# $3:平台
# $4:连接定义
# $5:模组序号
rndis_dial()
{
    local at_port="$1"
    local manufacturer="$2"
    local platform="$3"
    local define_connect="$4"
    local modem_no="$5"

    #手动设置IP（广和通FM350-GL）
    if [ "$manufacturer" = "fibocom" ] && [ "$platform" = "mediatek" ]; then

        at_command="AT+CGACT=1,${define_connect}"
        #打印日志
        dial_log "${at_command}" "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"
        #激活并拨号
        at "${at_port}" "${at_command}"

        sleep 3s
    else
        #拨号
        ecm_dial "${at_port}" "${manufacturer}"
    fi
}

#Modem Manager拨号
# $1:接口名称
# $2:连接定义
modemmanager_dial()
{
    local interface_name="$1"
    local define_connect="$2"

    # #激活
    # local at_command="AT+CGACT=1,${define_connect}"
    # #打印日志
    # dial_log "${at_command}" "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"
    # at "${at_port}" "${at_command}"

    #启动网络接口
    ifup "${interface_name}";
}

#检查模组网络连接
# $1:配置ID
# $2:模组序号
# $3:拨号模式
modem_network_task()
{
    local config_id="$1"
    local modem_no="$2"
    local mode="$3"

    #获取AT串口，制造商，平台，连接定义，接口名称
    local at_port=$(uci -q get modem.modem${modem_no}.at_port)
	local manufacturer=$(uci -q get modem.modem${modem_no}.manufacturer)
	local platform=$(uci -q get modem.modem${modem_no}.platform)
    local define_connect=$(uci -q get modem.modem${modem_no}.define_connect)
    local interface_name="wwan_5g_${modem_no}"
    local interface_name_ipv6="wwan6_5g_${modem_no}"

    #重载配置（解决AT命令发不出去的问题）
    # service modem reload

    #IPv4地址缓存
    local ipv4_cache

    #输出日志
    echo "[$(date +"%Y-%m-%d %H:%M:%S")] Start network task" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"
    while true; do
        #全局
        local enable=$(uci -q get modem.@global[0].enable)
        if [ "$enable" != "1" ]; then
            #输出日志
            echo "[$(date +"%Y-%m-%d %H:%M:%S")] The dialing configuration has been disabled, this network task quit" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"
            break
        fi
        #单个模组
        enable=$(uci -q get modem.${config_id}.enable)
        if [ "$enable" != "1" ]; then
            #输出日志
            echo "[$(date +"%Y-%m-%d %H:%M:%S")] The modem has disabled dialing, this network task quit" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"
            break
        fi

        #网络连接检查
        local at_command="AT+CGPADDR=${define_connect}"
        local ipv4=$(at ${at_port} ${at_command} | grep "+CGPADDR: " | awk -F'"' '{print $2}')

        if [ -z "$ipv4" ]; then

            [ "$mode" = "modemmanager" ] && {
                #拨号工具为modemmanager时，不需要重新设置连接定义
                continue
            }

            #输出日志
            echo "[$(date +"%Y-%m-%d %H:%M:%S")] Unable to get IPv4 address" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"
            echo "[$(date +"%Y-%m-%d %H:%M:%S")] Redefine connect to ${define_connect}" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"
            service modem reload

            #输出日志
            echo "[$(date +"%Y-%m-%d %H:%M:%S")] Modem dial" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"
            #拨号（针对获取IPv4返回为空的模组）
            case "$mode" in
                "gobinet") gobinet_dial "${at_port}" "${manufacturer}" "${define_connect}" ;;
                "ecm") ecm_dial "${at_port}" "${manufacturer}" "${define_connect}" ;;
                "rndis") rndis_dial "${at_port}" "${manufacturer}" "${platform}" "${define_connect}" "${modem_no}" ;;
                "modemmanager") modemmanager_dial "${interface_name}" "${define_connect}" ;;
                *) ecm_dial "${at_port}" "${manufacturer}" "${define_connect}" ;;
            esac

        elif [[ "$ipv4" = *"0.0.0.0"* ]]; then

            #输出日志
            echo "[$(date +"%Y-%m-%d %H:%M:%S")] Modem${modem_no} current IPv4 address : ${ipv4}" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"

            #输出日志
            echo "[$(date +"%Y-%m-%d %H:%M:%S")] Modem dial" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"
            #拨号
            case "$mode" in
                "gobinet") gobinet_dial "${at_port}" "${manufacturer}" "${define_connect}" ;;
                "ecm") ecm_dial "${at_port}" "${manufacturer}" "${define_connect}" ;;
                "rndis") rndis_dial "${at_port}" "${manufacturer}" "${platform}" "${define_connect}" "${modem_no}" ;;
                "modemmanager") modemmanager_dial "${interface_name}" "${define_connect}" ;;
                *) ecm_dial "${at_port}" "${manufacturer}" "${define_connect}" ;;
            esac
            
        elif [ "$ipv4" != "$ipv4_cache" ]; then

            #第一次缓存IP为空时不输出日志
            [ -n "$ipv4_cache" ] && {
                #输出日志
                echo "[$(date +"%Y-%m-%d %H:%M:%S")] Modem${modem_no} IPv4 address has changed" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"
            }

            #输出日志
            echo "[$(date +"%Y-%m-%d %H:%M:%S")] Modem${modem_no} current IPv4 address : ${ipv4}" >> "${MODEM_RUNDIR}/modem${modem_no}_dial.cache"

            #缓存当前IP
            ipv4_cache="${ipv4}"

            #重新设置网络接口（广和通FM350-GL）
            if [ "$manufacturer" = "fibocom" ] && [ "$platform" = "mediatek" ]; then
                reset_network_interface "${at_port}" "${define_connect}" "${modem_no}"
            fi

            [ "$mode" != "modemmanager" ] && {
                #重新启动网络接口
                ifup "${interface_name}"
                ifup "${interface_name_ipv6}"
            }
        fi
        sleep 5s
    done
}

modem_network_task "$1" "$2" "$3"