#!/bin/sh
source /usr/share/cpe/cpedebug
source /usr/share/cpe/SIMCOM
source /usr/share/cpe/Quectel
source /usr/share/cpe/Fibocom

#初值化数据结构
InitData()
{
    Date=''
	CHANNEL="-" 
	ECIO="-"
	RSCP="-"
	ECIO1=" "
	RSCP1=" "
	NETMODE="-"
	LBAND="-"
	PCI="-"
	CTEMP="-"
	MODE="-"
	SINR="-"
	IMEI='-'
	IMSI='-'
	ICCID='-'
	phone='-'
	conntype=''
	Model=''


}
#写数据
SETData()
{
    {
        echo $Model #'RM520N-GL'
        echo $conntype #'conntype'
        echo '1e0e:9001'
        echo $COPS #运营商
        echo 'ttyUSB2' #端口
        echo $TEMP #温度
        echo 'QMI' #协议 
        echo '---------------------------------'
        echo $IMEI #imei
        echo $IMSI #imsi
        echo $ICCID #iccid
        echo $phone #phone
        echo '---------------------------------'
        
        echo $MODE
        echo $CSQ
        echo $CSQ_PER
        echo $CSQ_RSSI
        echo $ECIO #参考信号接收质量 RSRQ ecio
        echo $ECIO1 #参考信号接收质量 RSRQ ecio1
        echo $RSCP #参考信号接收功率 RSRP rscp0
        echo $RSCP1 #参考信号接收功率 RSRP rscp1
        echo $SINR #信噪比 SINR  rv["sinr"]
        echo $NETMODE #连接状态监控 rv["netmode"]
        echo '---------------------------------'


        echo $COPS_MCC #MCC
        echo $$COPS_MNC #MNC
        echo $LAC  #eNB ID
        echo ''  #LAC_NUM
        echo $RNC #TAC
        echo '' #RNC_NUM
        echo $CID
        echo ''  #CID_NUM
        echo $LBAND
        echo $CHANNEL
        echo $PCI

        echo $Date


        
        echo $MODTYPE
        echo $QTEMP
    
    } > /tmp/cpe_cell.file
}
ATPORT=1

# 自动处理模块信号
AUTO_CPE()
{
    Debug "------------------------------端口$ATPORT---------------------------"
	Debug "AUTO_CPE"
	Date=$(date "+%Y-%m-%d %H:%M:%S")


	#检测设备是否准备好
	rec=$(sendat $ATPORT "AT" 500 |grep OK |wc -l) 
	if [ $rec == "1" ];then
		sleep 1s
	else
		sleep 5s
		return
	fi
    #读取模块信息
    # if [ "$conntype" == "" ]; then
    # {
    #     Debug "计算模块"
    #     ATATI=$( sendat $ATPORT "ATI")
    #     Getconntype=$(echo "$ATATI" | sed -n '2p')
    #     if [ "$Getconntype" == "" ]; then
    #     {
    #         sleep 5s
	# 	    return
    #     }
    #     fi
    #     Model=$(echo "$ATATI" | sed -n '3p')
    #     conntype=$Getconntype
    # }
    # fi

    Debug "读取模块信息 计算模块"
    ATATI=$( sendat $ATPORT "ATI")
    Getconntype=$(echo "$ATATI" | sed -n '2p')
    if [ "$Getconntype" == "" ]; then
    {
        sleep 5s
        return
    }
    fi
    Model=$(echo "$ATATI" | sed -n '3p')
    conntype=$Getconntype

    cpin=$( sendat $ATPORT "at+cpin?")
    ERR=$(echo "$cpin" | grep "ERROR")
	if [ ! -z "$ERR" ]; then # No SIM
		Debug "No SIM"
        sleep 5s
		return
	fi
	RDY=$(echo "$cpin" | grep "READY")
	if [ -z "$RDY" ]; then # SIM Locked
		Debug "Correct Pin"
        sleep 5s
		return
	else
		Debug "Not Locked"
	fi
    #执行对应模块
	if [ $(echo $conntype |grep "Quectel"| wc -l) -ge 1 ];then
	{
        Quectel_AT 
    }
	elif [ $(echo $conntype |grep "SIMCOM"| wc -l) -ge 1 ];then
    {
        SIMCOM_AT
    }
	elif [ $(echo $conntype |grep "Fibocom"| wc -l) -ge 1 ];then
    {
        Fibocom_AT
    }
    else
    {
        Debug "null "
    }
	fi
}
#重新联网
modem_reset()
{
    
    echo "Abnormal network restart"
    lsusb=$( lsusb )
    RDFM650=$(echo "$lsusb" | grep "ID 2cb7:0a05 " | wc -l)
    echo "RDFM650 $RDFM650"
	if [ "$RDFM650" == 1 ]; then
	{
        GTRNDIS=$(sendat $ATPORT "AT+GTRNDIS=1,1" 500 |grep OK |wc -l) 
        sleep 2s
    }
	else
	{
        start="$( /etc/init.d/modem stop )"
        sleep 2s
        start="$( /etc/init.d/modem start )"
        sleep 5s
    }
	fi
}
#检测SIM卡是否插入,10次检测不到则重启模块
check_sim()
{
	while [ 1 ]
	do
        enabled=$(uci -q get modem.@ndis[0].enabled)
        if [ $enabled == '1' ] ;then
            echo "Check the sim"
            rec=$( sendat 2 "AT+CPIN?")
            rec1=$(echo $rec | grep "READY" | wc -l )
            if [ $rec1 == 1 ]; then
                x=0
                echo "SIM is READY"
            else
                let x++
                if [ $x == 10 ]; then
                    echo "SIM abnormal restart" 
                    modem_reset	#重启模块
                    x=0
                fi
            fi
        fi
		sleep 6s
	done
}
#检测网络状态第一次开机
chenk_firstdns()
{
    while [ 1 ]
    do
        enabled=$(uci -q get modem.@ndis[0].enabled)
        en1=$(uci -q get modem.@ndis[0].en)
        if [ $enabled == '1' ] ;then
            if [ $en1 == '1' ] ;then
                echo "------------------------------开启任务---------------------------"
                ipadd=$(uci -q get modem.@ndis[0].ipaddress)
                ping -c 1 -w 1  $ipadd > /dev/null 2>&1
                if [ $? -eq 0 ];then  
                    echo "网络连接正常" 
                    xx=0
                    return
                else  
                    echo "网络连接异常 $ipadd" 
                    let xx++
                    let pxx++
                fi	
            fi
            if [ $xx == 5 ];then
                xx=0
                modem_reset
            fi
            if [ $pxx == 10 ];then
                xx=0
                pxx=0
                return
            fi
            echo "------------------------------结束任务---------------------------"
        fi
	    sleep 1s
    done
}
#检测网络状态
chenk_dns()
{
    en1=$(uci -q get modem.@ndis[0].en)
    if [ $en1 == '1' ] ;then
        echo "------------------------------开启任务---------------------------"
        ipadd=$(uci -q get modem.@ndis[0].ipaddress)
        ping -c 1 -w 1  $ipadd > /dev/null 2>&1
        if [ $? -eq 0 ];then  
            echo "网络连接正常" 
            xx=0
        else  
            echo "网络连接异常 $ipadd 次数$xx" 
            let xx++
        fi	
    fi
    an=$(uci -q get modem.@ndis[0].an)
    if [ $xx == $an ];then
        xx=0
        modem_reset
    fi
    echo "------------------------------结束任务---------------------------"

}
# 信号任务
chenk_Task()
{
    while [ 1 ]
    do
        enabled=$(uci -q get modem.@ndis[0].enabled)
        if [ $enabled == '1' ] ;then
            ATPORT
            Debug "------------------------------开启任务---------------------------"
            AUTO_CPE
            SETData
            chenk_dns
            Debug "------------------------------结束任务---------------------------"
        fi
        sleep 10s
    done
}


#注册网卡
RegisterNetwork()
{
    # ATPORT
    Debug "RegisterNetwork 注册网卡 $ $MODEMNAME"
    # if [ "$MODEMNAME" == "FM650CN" ]; then
    #     getFM650=$(uci -q get network.wwan5g |grep "interface"| wc -l)
    #     if [ $getFM650 == "0" ] ;then
    #         uci set network.wwan5g=interface
    #         uci set network.wwan5g.ifname='usb0'
    #         uci set network.wwan5g.proto=dhcp
    #         uci commit network
            
    #         uci set firewall.@zone[1].network="wan wan6 wwan5g wwan5g6 wlan"
    #         uci commit firewall

    #         $(/etc/init.d/network reload)
    #     fi
    #     getFM650=$(uci -q get network.wwan5g6|grep "interface"| wc -l)
    #     if [ $getFM650 == "0" ] ;then
    #         uci set network.wwan5g6=interface
    #         uci set network.wwan5g6.ifname='usb0'
    #         uci set network.wwan5g6.proto='dhcpv6'
    #         uci set network.wwan5g6.reqaddress='try'
    #         uci set network.wwan5g6.reqprefix='auto'
    #         uci set network.wwan5g6._orig_ifname='usb0'
    #         uci set network.wwan5g6._orig_bridge='false'
    #         uci set network.wwan5g6.extendprefix='1'
    #         uci commit network
    #         uci set firewall.@zone[1].network="wan wan6 wwan wwan5g wwan5g6 wlan"
    #         uci commit firewall
    #         $(/etc/init.d/network reload)
    #     fi
    # fi



    if [ $(uci -q get network.wwan5g |grep "interface"| wc -l) == "0" ] ;then
        uci set network.wwan5g=interface
        if [ "$MODEMNAME" == "FM650CN" ]; then
            uci set network.wwan5g.ifname='usb0'
        else
            uci set network.wwan5g.ifname='wwan0'
        fi
        uci set network.wwan5g.proto=dhcp
        uci commit network
        uci set firewall.@zone[1].network="wan wan6 wwan5g wwan5g6 wlan"
        uci commit firewall
        $(/etc/init.d/network reload)
    fi
    if [ $(uci -q get network.wwan5g6 |grep "interface"| wc -l) == "0" ] ;then
        uci set network.wwan5g6=interface
        if [ "$MODEMNAME" == "FM650CN" ]; then
            uci set network.wwan5g6.ifname='usb0'
            uci set network.wwan5g6._orig_ifname='usb0'
        else
            uci set network.wwan5g6.ifname='wwan0'
            uci set network.wwan5g6._orig_ifname='wwan0'
        fi
        uci set network.wwan5g6.proto='dhcpv6'
        uci set network.wwan5g6.reqaddress='try'
        uci set network.wwan5g6.reqprefix='auto'
        uci set network.wwan5g6._orig_bridge='false'
	uci set network.wwan5g6.extendprefix='1'
        uci commit network
        uci set firewall.@zone[1].network="wan wan6 wwan wwan5g wwan5g6 wlan"
        uci commit firewall
        $(/etc/init.d/network reload)
    fi
    if [ "$MODEMNAME" == "FM650CN" ]; then
        if [ $(uci -q get network.wwan5g.ifname |grep "usb0"| wc -l) == "0" ] ;then
            uci set network.wwan5g.ifname='usb0'
            uci commit network
            $(/etc/init.d/network reload)
        fi
        if [ $(uci -q get network.wwan5g6.ifname |grep "usb0"| wc -l) == "0" ] ;then
            uci set network.wwan5g6.ifname='usb0'
            uci commit network
            $(/etc/init.d/network reload)
        fi
    else
        if [ $(uci -q get network.wwan5g.ifname |grep "wwan0"| wc -l) == "0" ] ;then
            uci set network.wwan5g.ifname='wwan0'
            uci commit network
            $(/etc/init.d/network reload)
        fi
        if [ $(uci -q get network.wwan5g6.ifname |grep "wwan0"| wc -l) == "0" ] ;then
            uci set network.wwan5g6._orig_ifname='wwan0'
            uci set network.wwan5g6.ifname='wwan0'
            uci commit network
            $(/etc/init.d/network reload)   
        fi
    fi



}



# 运行入口
first()
{
    Debug "开启RSSI服务"
    # 初值化数据结构
    InitData
    Debug "初值化数据完成"
    sleep 1s
    # 计算模块AT端口号
    ATPORT
    # 注册网卡
    RegisterNetwork
    # 第一次获取模块信息数据
    AUTO_CPE
    # 保存结构数据
    SETData
    #开机直接运行网络注册
    modem_reset
    # 第一次开机检测是否联网
    chenk_firstdns
    chenk_Task
}

#############################################
#					#
#		进入主函数                             #
#					#
#############################################
first