diff --git a/bin/ ZeroWrt.backup b/bin/ ZeroWrt.backup
new file mode 100644
index 0000000..97845a1
--- /dev/null
+++ b/bin/ ZeroWrt.backup	
@@ -0,0 +1,401 @@
+#!/bin/bash
+
+# 彩色输出函数
+color_output() {
+    echo -e "$1"
+}
+
+# 打印脚本头部，增加美观
+print_header() {
+    clear
+    # 获取系统信息
+    local model=$(cat /tmp/sysinfo/model 2>/dev/null || echo "未知设备")
+    # 使用更可靠的方式获取 CPU 使用率
+    local cpu_usage=$(grep 'cpu ' /proc/stat | awk '{usage=($2+$4)*100/($2+$4+$5)} END {printf "%.1f%%", usage}')
+    local mem_total=$(free | grep Mem | awk '{print $2}')
+    local mem_used=$(free | grep Mem | awk '{print $3}')
+    local mem_usage=$((mem_used * 100 / mem_total))
+
+    color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m"
+    color_output "\e[36m┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓\e[0m"
+    color_output "\e[36m┃                                       ┃\e[0m"
+    color_output "\e[36m┃        \e[33m欢迎使用 ZeroWrt 配置工具\e[36m      ┃\e[0m"
+    color_output "\e[36m┃                                       ┃\e[0m"
+    color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m"
+    color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m"
+    color_output ""
+    color_output "\e[34m系统信息\e[0m"
+    color_output "----------------------------------------"
+    color_output "  设备型号: $model"
+    color_output "  CPU 占用: $cpu_usage"
+    color_output "  内存占用: ${mem_usage}%"
+    color_output "----------------------------------------"
+    color_output "\e[32m说明：本工具用于配置 OpenWrt-24.10\e[0m"
+    color_output "\e[32m博客：https://www.kejizero.online\e[0m"
+    color_output "----------------------------------------"
+    echo ""
+}
+
+# 显示菜单
+show_menu() {
+    color_output "\e[36m┏━━━━━━━━━━━━━━━ 功能菜单 ━━━━━━━━━━━━━━━┓\e[0m"
+    color_output "\e[36m┃                                        ┃\e[0m"
+    color_output "\e[36m┃\e[0m  1. 更改 LAN 口 IP 地址                \e[36m┃\e[0m"
+    color_output "\e[36m┃\e[0m  2. 更改管理员密码                     \e[36m┃\e[0m"
+    color_output "\e[36m┃\e[0m  3. 切换默认主题                       \e[36m┃\e[0m"
+    color_output "\e[36m┃\e[0m  4. 恢复出厂设置                       \e[36m┃\e[0m"
+    color_output "\e[36m┃\e[0m  5. 一键换源                           \e[36m┃\e[0m"
+    color_output "\e[36m┃\e[0m  6. 一键部署                           \e[36m┃\e[0m"
+    color_output "\e[36m┃\e[0m  7. 检测更新                           \e[36m┃\e[0m"
+    color_output "\e[36m┃\e[0m  0. 退出                               \e[36m┃\e[0m"
+    color_output "\e[36m┃                                        ┃\e[0m"
+    color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m"
+    read -p "$(color_output "\e[33m请输入您的选择 [0-7]: \e[0m")" choice
+    case "$choice" in
+        1) change_ip ;;
+        2) change_password ;;
+        3) change_theme ;;
+        4) reset_config ;;
+        5) change_source ;;
+        6) install_apps ;;
+        7) check_update ;;
+        0) exit 0 ;;
+        *) echo "无效选项，请重新输入"; show_menu ;;
+    esac
+}
+
+# 1. 更换 LAN 口 IP 地址
+change_ip() {
+    color_output "\e[34m[更改 LAN 口 IP 地址]\e[0m"
+    read -p "请输入新的 LAN 口 IP 地址（如 192.168.1.2）: " new_ip
+    if [[ -n "$new_ip" ]]; then
+        uci set network.lan.ipaddr="$new_ip"
+        uci commit network
+        /etc/init.d/network restart
+        color_output "\e[32mLAN 口 IP 已成功更改为 $new_ip\e[0m"
+    else
+        color_output "\e[31m无效的 IP 地址，操作取消。\e[0m"
+    fi
+    read -p "按 Enter 键返回菜单..." 
+    show_menu
+}
+
+# 2. 更改管理员密码
+change_password() {
+    color_output "\e[34m[更改管理员密码]\e[0m"
+    read -p "请输入新的管理员密码: " new_password
+    if [[ -n "$new_password" ]]; then
+        echo -e "$new_password\n$new_password" | passwd root
+        color_output "\e[32m管理员密码已成功更改。\e[0m"
+    else
+        color_output "\e[31m无效的密码，操作取消。\e[0m"
+    fi
+    read -p "按 Enter 键返回菜单..."
+    show_menu
+}
+
+# 3. 切换默认主题
+change_theme() {
+    color_output "\e[34m[切换默认主题]\e[0m"
+    uci set luci.main.mediaurlbase='/luci-static/bootstrap'
+    uci commit luci
+    color_output "\e[32m主题已成功切换为默认主题。\e[0m"
+    read -p "按 Enter 键返回菜单..."
+    show_menu
+}
+
+# 4. 一键重置配置
+reset_config() {
+    color_output "\e[31m[恢复出厂设置]\e[0m"
+    color_output "\e[31m警告：此操作将清除所有设置！\e[0m"
+    read -p "确定要继续吗？(y/n): " confirm
+    if [[ "$confirm" == "y" || "$confirm" == "Y" ]]; then
+        echo "恢复出厂设置中..."
+        firstboot -y
+        color_output "\e[33m设备将在 5 秒钟后重启...\e[0m"
+        sleep 5
+        reboot
+    else
+        color_output "\e[32m操作已取消\e[0m"
+        read -p "按 Enter 键返回菜单..."
+        show_menu
+    fi
+}
+
+# 5. 一键换源
+change_source() {
+    color_output "\e[34m[更换软件源]\e[0m"
+    color_output "\e[36m请选择要使用的源：\e[0m"
+    color_output "1. 阿里源"
+    color_output "2. 清华源"
+    color_output "3. 中科大源"
+    color_output "4. 官方源"
+    color_output "0. 返回"
+    read -p "请输入您的选择 [0-4]: " source_choice
+
+    case "$source_choice" in
+        1) base_url="https://mirrors.aliyun.com/openwrt/releases/24.10.0-rc4/packages/x86_64" ;;
+        2) base_url="https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/24.10.0-rc4/packages/x86_64" ;;
+        3) base_url="https://mirrors.ustc.edu.cn/openwrt/releases/24.10.0-rc4/packages/x86_64" ;;
+        4) base_url="https://downloads.openwrt.org/releases/24.10.0-rc4/packages/x86_64" ;;
+        0) show_menu ; return ;;
+        *) color_output "\e[31m无效选项，返回菜单。\e[0m" ; show_menu ; return ;;
+    esac
+
+    cat <<EOF > /etc/opkg/distfeeds.conf
+src/gz openwrt_base $base_url/base
+src/gz openwrt_luci $base_url/luci
+src/gz openwrt_packages $base_url/packages
+src/gz openwrt_routing $base_url/routing
+src/gz openwrt_telephony $base_url/telephony
+EOF
+
+    color_output "\e[32m软件源已成功切换。\e[0m"
+    read -p "按 Enter 键返回菜单..."
+    show_menu
+}
+
+# 6. 一键部署
+install_apps() {
+    while true; do
+        clear
+        color_output "\e[34m[一键部署]\e[0m"
+        color_output "\e[36m┏━━━━━━━━━━━━━━━ 部署选项 ━━━━━━━━━━━━━━━┓\e[0m"
+        color_output "\e[36m┃                                        ┃\e[0m"
+        color_output "\e[36m┃\e[0m  1. 部署 ShellClash                    \e[36m┃\e[0m"
+        color_output "\e[36m┃\e[0m  2. 部署 小雅 Alist                    \e[36m┃\e[0m"
+        color_output "\e[36m┃\e[0m  3. 部署 Subconverter                  \e[36m┃\e[0m"
+        color_output "\e[36m┃\e[0m  4. 部署 AdGuardhome                   \e[36m┃\e[0m"     
+        color_output "\e[36m┃\e[0m  0. 返回主菜单                         \e[36m┃\e[0m"
+        color_output "\e[36m┃                                        ┃\e[0m"
+        color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m"
+        
+        read -p "$(color_output "\e[33m请输入您的选择 [0-4]: \e[0m")" app_choice
+
+        case "$app_choice" in
+            1)
+                color_output "\e[34m[部署 ShellClash]\e[0m"
+                color_output "\e[36m请选择 ShellClash 的安装源：\e[0m"
+                color_output "1. GitHub 源"
+                color_output "2. jsDelivr CDN 源"
+                color_output "0. 返回"
+                read -p "请输入您的选择 [0-2]: " install_choice
+
+                case "$install_choice" in
+                    1) export url='https://raw.githubusercontent.com/juewuy/ShellCrash/master' ;;
+                    2) export url='https://fastly.jsdelivr.net/gh/juewuy/ShellCrash@master' ;;
+                    0) continue ;;
+                    *) 
+                        color_output "\e[31m无效选项\e[0m"
+                        sleep 2
+                        continue 
+                        ;;
+                esac
+
+                if [ "$install_choice" != "0" ]; then
+                    sh -c "$(curl -kfsSl $url/install.sh)" && source /etc/profile &> /dev/null
+                    color_output "\e[32mShellClash 已成功安装。\e[0m"
+                    read -p "按 Enter 键继续..."
+                fi
+                ;;
+
+            2)
+                color_output "\e[34m[部署小雅 Alist]\e[0m"
+                color_output "\e[33m正在部署小雅 Alist...\e[0m"
+                bash -c "$(curl --insecure -fsSL https://ddsrem.com/xiaoya_install.sh)"
+                color_output "\e[32m小雅 Alist 安装完成。\e[0m"
+                read -p "按 Enter 键继续..."
+                ;;
+            3)
+                color_output "\e[34m[部署 Subconverter]\e[0m"
+                
+                # 检查 Docker 是否已安装
+                if ! command -v docker &> /dev/null; then
+                    color_output "\e[33m未检测到 Docker，正在安装...\e[0m"
+                    opkg update && opkg install docker
+                fi
+                
+                # 检查 Subconverter 是否已运行
+                if docker ps | grep -q "subconverter"; then
+                    color_output "\e[32mSubconverter 已经在运行\e[0m"
+                    
+                    # 获取本机 IP 地址
+                    local_ip=$(ip addr show br-lan | grep -w inet | awk '{print $2}' | cut -d/ -f1)
+                    
+                # 显示配置模板选项
+                color_output "\e[36m┏━━━━━━━━━━━━━━━ 配置模板 ━━━━━━━━━━━━━━━┓\e[0m"
+                color_output "\e[36m┃                                        ┃\e[0m"
+                color_output "\e[36m┃\e[0m  1. ACL4SSR_Online_Mini.ini            \e[36m┃\e[0m"
+                color_output "\e[36m┃\e[0m  2. ACL4SSR_Online_Full.ini            \e[36m┃\e[0m"
+                color_output "\e[36m┃\e[0m  3. ACL4SSR_Online.ini                 \e[36m┃\e[0m"
+                color_output "\e[36m┃\e[0m  0. 返回上一级                         \e[36m┃\e[0m"
+                color_output "\e[36m┃                                        ┃\e[0m"
+                color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m"
+                read -p "$(color_output "\e[33m请输入选择 [0-3]: \e[0m")" template_choice
+
+                case "$template_choice" in
+                1) config_url="https://git.kejizero.online/zhao/rule/raw/branch/main/mihomo/ACL4SSR_Online_Mini.ini" ;;
+                2) config_url="https://git.kejizero.online/zhao/rule/raw/branch/main/mihomo/ACL4SSR_Online_Full.ini" ;;
+                3) config_url="https://git.kejizero.online/zhao/rule/raw/branch/main/mihomo/ACL4SSR_Online.ini" ;;
+                0) continue ;; # 返回上一级
+                *) 
+                color_output "\e[31m无效选择\e[0m"
+                read -p "按 Enter 键继续..."
+                continue
+                 ;;
+                esac
+                    
+                    # 获取订阅链接
+                    read -p "请输入订阅链接: " sub_url
+                    
+                    if [ -n "$sub_url" ]; then
+                        # 生成完整的转换链接
+                        convert_url="http://${local_ip}:25500/sub?target=clash&insert=true&new_name=true&scv=true&url=${sub_url}&config=${config_url}"
+                        
+                        color_output "\e[32m转换链接已生成：\e[0m"
+                        color_output "\e[33m${convert_url}\e[0m"
+                    else
+                        color_output "\e[31m订阅链接不能为空\e[0m"
+                    fi
+                else
+                    color_output "\e[33m正在部署 Subconverter...\e[0m"
+                    if docker run -d --restart=always -p 25500:25500 tindy2013/subconverter:latest; then
+                        color_output "\e[32mSubconverter 部署成功！\e[0m"
+                    else
+                        color_output "\e[31mSubconverter 部署失败\e[0m"
+                    fi
+                fi
+                read -p "按 Enter 键返回..."
+                ;;
+            4)
+                color_output "\e[34m[部署 AdGuardHome]\e[0m"
+                
+                # 检查 Docker 是否已安装
+                if ! command -v docker &> /dev/null; then
+                    color_output "\e[33m未检测到 Docker，正在安装...\e[0m"
+                    opkg update && opkg install docker
+                fi
+                
+                # 获取本机 IP 地址
+                local_ip=$(ip addr show br-lan | grep -w inet | awk '{print $2}' | cut -d/ -f1)
+                
+                # 检查 AdGuardHome 是否已运行
+                if docker ps | grep -q "adguardhome"; then
+                    color_output "\e[32mAdGuardHome 已经在运行！\e[0m"
+                    color_output "\e[33m请使用浏览器访问：\e[0m"
+                    color_output "\e[32mhttp://${local_ip}:3000\e[0m"
+                else
+                    color_output "\e[33m正在部署 AdGuardHome...\e[0m"
+                    
+                    # 创建配置目录
+                    mkdir -p /root/adguardhome/work /root/adguardhome/conf
+                    
+                    # 部署 AdGuardHome
+                    if docker run -d \
+                        --name adguardhome \
+                        -v /root/adguardhome/work:/opt/adguardhome/work \
+                        -v /root/adguardhome/conf:/opt/adguardhome/conf \
+                        -p 3000:3000 \
+                        --restart always \
+                        adguard/adguardhome; then
+                        
+                        color_output "\e[32m\nAdGuardHome 部署成功！\e[0m"
+                        color_output "\e[33m请使用浏览器访问以下地址进行配置：\e[0m"
+                        color_output "\e[32mhttp://${local_ip}:3000\e[0m"
+                    else
+                        color_output "\e[31mAdGuardHome 部署失败\e[0m"
+                    fi
+                fi
+                read -p "按 Enter 键返回..."
+                ;;                
+            0)
+                show_menu
+                return
+                ;;
+            *)
+                color_output "\e[31m无效选项，请重新选择\e[0m"
+                sleep 2
+                ;;
+        esac
+    done
+}
+
+# 7. 检测更新
+check_update() {
+    color_output "\e[34m[检测更新]\e[0m"
+    color_output "正在检查更新..."
+    
+    # 检查 wget 是否安装
+    if ! command -v wget >/dev/null 2>&1; then
+        color_output "\e[33m正在安装 wget...\e[0m"
+        opkg update && opkg install wget
+    fi
+    
+    # 创建临时目录
+    local temp_dir="/tmp/zerowrt_update"
+    mkdir -p "$temp_dir"
+    
+    # 下载远程版本文件
+    if ! wget -q "https://git.kejizero.online/zhao/files/raw/branch/main/bin/version.txt" -O "$temp_dir/version.txt"; then
+        color_output "\e[31m无法连接到更新服务器。\e[0m"
+        rm -rf "$temp_dir"
+        read -p "按 Enter 键返回菜单..."
+        show_menu
+        return
+    fi
+    
+    # 获取本地版本和远程版本
+    local_version=$(cat /root/version.txt 2>/dev/null || echo "0")
+    remote_version=$(cat "$temp_dir/version.txt" 2>/dev/null || echo "0")
+    
+    # 比较版本
+    if [ "$local_version" != "$remote_version" ]; then
+        color_output "\e[33m发现新版本：$remote_version\e[0m"
+        color_output "\e[33m当前版本：$local_version\e[0m"
+        read -p "是否更新到最新版本？(y/n): " confirm
+        if [[ "$confirm" == "y" || "$confirm" == "Y" ]]; then
+            color_output "开始下载更新..."
+            
+            # 下载新版本到临时文件
+            if wget -q "https://git.kejizero.online/zhao/files/raw/branch/main/bin/ZeroWrt" -O "$temp_dir/ZeroWrt.new"; then
+                # 检查文件是否为有效的 shell 脚本
+                if head -n1 "$temp_dir/ZeroWrt.new" | grep -q "^#!/bin/bash"; then
+                    # 备份当前版本
+                    cp /bin/ZeroWrt /bin/ZeroWrt.bak 2>/dev/null
+                    
+                    # 安装新版本
+                    mv "$temp_dir/ZeroWrt.new" /bin/ZeroWrt
+                    chmod +x /bin/ZeroWrt
+                    
+                    # 更新版本文件
+                    echo "$remote_version" > /root/version.txt
+                    
+                    color_output "\e[32m更新成功！\e[0m"
+                    color_output "\e[32m已备份原版本为 /bin/ZeroWrt.bak\e[0m"
+                    color_output "\e[32m请重新运行脚本以应用更新。\e[0m"
+                    
+                    # 清理并退出
+                    rm -rf "$temp_dir"
+                    exit 0
+                else
+                    color_output "\e[31m下载的文件格式不正确。\e[0m"
+                fi
+            else
+                color_output "\e[31m更新下载失败。\e[0m"
+            fi
+        else
+            color_output "\e[32m已取消更新。\e[0m"
+        fi
+    else
+        color_output "\e[32m当前已是最新版本：$local_version\e[0m"
+    fi
+    
+    # 清理临时文件
+    rm -rf "$temp_dir"
+    read -p "按 Enter 键返回菜单..."
+    show_menu
+} 
+
+# 启动菜单
+print_header
+show_menu
\ No newline at end of file