diff --git a/bin/ZeroWrt_mtk b/bin/ZeroWrt_mtk new file mode 100644 index 0000000..b470eb1 --- /dev/null +++ b/bin/ZeroWrt_mtk @@ -0,0 +1,2107 @@ +#!/bin/bash + +# 初始化语言变量 +LANG_CHOICE="" +AGREED="no" + +# 彩色输出函数 +color_output() { + echo -e "$1" +} + +# 显示语言选择菜单 +select_language() { + clear + color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m" + color_output "\e[36m┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┃ \e[33m请选择语言/Select Language\e[36m ┃\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" + color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m" + color_output "" + color_output "1. 中文" + color_output "2. English" + color_output "0. 退出/Exit" + color_output "" + color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m" + + while [[ -z "$LANG_CHOICE" ]]; do + read -p "$(color_output "\e[33m请选择语言 [0-2]: \e[0m")" LANG_CHOICE + case "$LANG_CHOICE" in + 1) LANG_CHOICE="zh";; + 2) LANG_CHOICE="en";; + 0) exit 0 ;; + *) + color_output "\e[31m无效选择，请重新输入\e[0m" + LANG_CHOICE="" + ;; + esac + done +} + +# 显示用户协议 +show_agreement() { + clear + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m" + color_output "\e[36m┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓\e[0m" + color_output "\e[36m┃ \e[33mZeroWrt 配置工具用户协议\e[36m ┃\e[0m" + color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" + color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m" + color_output "" + color_output "1. 本工具仅用于学习和研究目的，不得用于非法用途。" + color_output "2. 使用本工具可能会修改您的路由器配置，请谨慎操作。" + color_output "3. 作者不对使用本工具造成的任何损失负责。" + color_output "4. 继续使用表示您同意以上条款。" + color_output "" + color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m" + + while [[ "$AGREED" != "yes" ]]; do + read -p "$(color_output "\e[33m您是否同意上述条款？(yes/no): \e[0m")" AGREED + case "$AGREED" in + yes|YES|y|Y) + AGREED="yes" + ;; + no|NO|n|N) + color_output "\e[31m您必须同意条款才能使用本工具。\e[0m" + exit 1 + ;; + *) + color_output "\e[31m请输入yes或no\e[0m" + ;; + esac + done + else + color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m" + color_output "\e[36m┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓\e[0m" + color_output "\e[36m┃ \e[33mZeroWrt Config Tool User Agreement\e[36m ┃\e[0m" + color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" + color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m" + color_output "" + color_output "1. This tool is for learning and research only, not for illegal use." + color_output "2. Using this tool may modify your router settings, use with caution." + color_output "3. The author is not responsible for any damage caused by this tool." + color_output "4. Continuing to use means you agree to these terms." + color_output "" + color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m" + + while [[ "$AGREED" != "yes" ]]; do + read -p "$(color_output "\e[33mDo you agree to these terms? (yes/no): \e[0m")" AGREED + case "$AGREED" in + yes|YES|y|Y) + AGREED="yes" + ;; + no|NO|n|N) + color_output "\e[31mYou must agree to the terms to use this tool.\e[0m" + exit 1 + ;; + *) + color_output "\e[31mPlease enter yes or no\e[0m" + ;; + esac + done + fi +} + +# 打印脚本头部，增加美观 +print_header() { + clear + # 获取系统信息 + local model=$(cat /tmp/sysinfo/model 2>/dev/null || echo "未知设备") + # 使用更可靠的方式获取 CPU 使用率 + local cpu_usage=$(grep 'cpu ' /proc/stat | awk '{usage=($2+$4)*100/($2+$4+$5)} END {printf "%.1f%%", usage}') + local mem_total=$(free | grep Mem | awk '{print $2}') + local mem_used=$(free | grep Mem | awk '{print $3}') + local mem_usage=$((mem_used * 100 / mem_total)) + + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m" + color_output "\e[36m┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┃ \e[33m欢迎使用 ZeroWrt 配置工具\e[36m ┃\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" + color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m" + color_output "" + color_output "\e[34m系统信息\e[0m" + color_output "----------------------------------------" + color_output " 设备型号: $model" + color_output " CPU 占用: $cpu_usage" + color_output " 内存占用: ${mem_usage}%" + color_output "----------------------------------------" + color_output "\e[32m说明：本工具用于配置 ZeroWrt \e[0m" + color_output "\e[32m博客：https://www.kejizero.online\e[0m" + color_output "----------------------------------------" + else + color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m" + color_output "\e[36m┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┃ \e[33mWelcome to ZeroWrt Config Tool\e[36m ┃\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" + color_output "\e[36m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━\e[0m" + color_output "" + color_output "\e[34mSystem Information\e[0m" + color_output "----------------------------------------" + color_output " Device Model: $model" + color_output " CPU Usage: $cpu_usage" + color_output " Memory Usage: ${mem_usage}%" + color_output "----------------------------------------" + color_output "\e[32mDescription: This tool configures ZeroWrt\e[0m" + color_output "\e[32mBlog: https://www.kejizero.online\e[0m" + color_output "----------------------------------------" + fi + echo "" +} + +# 显示菜单 +show_menu() { + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[36m┏━━━━━━━━━━━━━━━ 功能菜单 ━━━━━━━━━━━━━━━┓\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┃\e[0m 1. 更改 LAN 口 IP 地址 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 2. 更改管理员密码 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 3. 切换默认主题 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 4. 恢复出厂设置 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 5. 一键换源 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 6. 一键部署 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 7. 一键加载驱动 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 8. IPv6 配置向导 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 9. 网络模式配置向导 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 10. iStoreOS 风格化 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 11. 系统信息查询 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 12. 检测更新 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 0. 退出 \e[36m┃\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" + read -p "$(color_output "\e[33m请输入您的选择 [0-10]: \e[0m")" choice + else + color_output "\e[36m┏━━━━━━━━━━━━━━━ MENU ━━━━━━━━━━━━━━━━━━┓\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┃\e[0m 1. Change LAN IP Address \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 2. Change Admin Password \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 3. Switch Default Theme \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 4. Factory Reset \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 5. Change Software Sources \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 6. One-click Deployment \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 7. One-click loading of drivers \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 8. IPv6-Wizard \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 9. network_mode_wizard \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 10. iStoreOS Styling \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 11. System information query \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 12. Check for Updates \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 0. Exit \e[36m┃\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" + read -p "$(color_output "\e[33mEnter your choice [0-10]: \e[0m")" choice + fi + + case "$choice" in + 1) change_ip ;; + 2) change_password ;; + 3) change_theme ;; + 4) reset_config ;; + 5) change_source ;; + 6) install_apps ;; + 7) Load_driver ;; + 8) ipv6_wizard ;; + 9) network_mode_wizard ;; + 10) istore_style ;; + 11) system_info ;; + 12) check_update ;; + 0) exit 0 ;; + *) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m无效选项，请重新输入\e[0m" + else + color_output "\e[31mInvalid option, please try again\e[0m" + fi + show_menu + ;; + esac +} + +# 1. 更换 LAN 口 IP 地址 +change_ip() { + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[更改 LAN 口 IP 地址]\e[0m" + read -p "请输入新的 LAN 口 IP 地址（如 192.168.1.2）: " new_ip + if [[ -n "$new_ip" ]]; then + uci set network.lan.ipaddr="$new_ip" + uci commit network + color_output "\e[32mLAN 口 IP 已成功更改为 $new_ip\e[0m" + color_output "\e[33m系统将在 10 秒后自动重启，请使用新的 IP 地址重新连接。\e[0m" + sleep 10 + reboot + else + color_output "\e[31m无效的 IP 地址，操作取消。\e[0m" + read -p "按 Enter 键返回菜单..." + show_menu + fi + else + color_output "\e[34m[Change LAN IP Address]\e[0m" + read -p "Enter new LAN IP address (e.g. 192.168.1.2): " new_ip + if [[ -n "$new_ip" ]]; then + uci set network.lan.ipaddr="$new_ip" + uci commit network + color_output "\e[32mLAN IP successfully changed to $new_ip\e[0m" + color_output "\e[33mSystem will reboot in 10 seconds, please reconnect using the new IP.\e[0m" + sleep 10 + reboot + else + color_output "\e[31mInvalid IP address, operation cancelled.\e[0m" + read -p "Press Enter to return to menu..." + show_menu + fi + fi +} + +# 2. 更改管理员密码 +change_password() { + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[更改管理员密码]\e[0m" + read -p "请输入新的管理员密码: " new_password + if [[ -n "$new_password" ]]; then + # 使用 openssl 生成密码哈希，使用 -1 参数生成 MD5 格式的密码哈希 + password_hash=$(openssl passwd -1 "$new_password") + + # 获取当前 shadow 文件的其他行 + tail -n +2 /etc/shadow > /tmp/shadow.tmp + + # 创建新的 root 行 + echo "root:$password_hash:0:0:99999:7:::" > /etc/shadow + + # 添加其他行 + cat /tmp/shadow.tmp >> /etc/shadow + + # 清理临时文件 + rm -f /tmp/shadow.tmp + + color_output "\e[32m管理员密码已成功更改。\e[0m" + else + color_output "\e[31m无效的密码，操作取消。\e[0m" + fi + read -p "按 Enter 键返回菜单..." + else + color_output "\e[34m[Change Admin Password]\e[0m" + read -p "Enter new admin password: " new_password + if [[ -n "$new_password" ]]; then + # 使用 openssl 生成密码哈希，使用 -1 参数生成 MD5 格式的密码哈希 + password_hash=$(openssl passwd -1 "$new_password") + + # 获取当前 shadow 文件的其他行 + tail -n +2 /etc/shadow > /tmp/shadow.tmp + + # 创建新的 root 行 + echo "root:$password_hash:0:0:99999:7:::" > /etc/shadow + + # 添加其他行 + cat /tmp/shadow.tmp >> /etc/shadow + + # 清理临时文件 + rm -f /tmp/shadow.tmp + + color_output "\e[32mAdmin password changed successfully.\e[0m" + else + color_output "\e[31mInvalid password, operation cancelled.\e[0m" + fi + read -p "Press Enter to return to menu..." + fi + show_menu +} + +# 3. 切换默认主题 +change_theme() { + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[切换默认主题]\e[0m" + uci set luci.main.mediaurlbase='/luci-static/bootstrap' + uci commit luci + color_output "\e[32m主题已成功切换为默认主题。\e[0m" + read -p "按 Enter 键返回菜单..." + else + color_output "\e[34m[Switch Default Theme]\e[0m" + uci set luci.main.mediaurlbase='/luci-static/bootstrap' + uci commit luci + color_output "\e[32mTheme successfully switched to default.\e[0m" + read -p "Press Enter to return to menu..." + fi + show_menu +} + +# 4. 一键重置配置 +reset_config() { + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m[恢复出厂设置]\e[0m" + color_output "\e[31m警告：此操作将清除所有设置！\e[0m" + read -p "确定要继续吗？(y/n): " confirm + if [[ "$confirm" == "y" || "$confirm" == "Y" ]]; then + echo "恢复出厂设置中..." + firstboot -y + color_output "\e[33m设备将在 5 秒钟后重启...\e[0m" + sleep 5 + reboot + else + color_output "\e[32m操作已取消\e[0m" + read -p "按 Enter 键返回菜单..." + show_menu + fi + else + color_output "\e[31m[Factory Reset]\e[0m" + color_output "\e[31mWarning: This will erase all settings!\e[0m" + read -p "Are you sure you want to continue? (y/n): " confirm + if [[ "$confirm" == "y" || "$confirm" == "Y" ]]; then + echo "Resetting to factory defaults..." + firstboot -y + color_output "\e[33mDevice will reboot in 5 seconds...\e[0m" + sleep 5 + reboot + else + color_output "\e[32mOperation cancelled\e[0m" + read -p "Press Enter to return to menu..." + show_menu + fi + fi +} + +# 5. 一键换源 +change_source() { + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[更换软件源]\e[0m" + color_output "\e[36m请选择要使用的源：\e[0m" + color_output "1. 阿里源" + color_output "2. 清华源" + color_output "3. 中科大源" + color_output "4. 高校联合镜像站" + color_output "5. 南方科技大学" + color_output "6. 官方源" + color_output "0. 返回" + read -p "请输入您的选择 [0-6]: " source_choice + else + color_output "\e[34m[Change Software Sources]\e[0m" + color_output "\e[36mSelect source to use:\e[0m" + color_output "1. Aliyun Mirror" + color_output "2. Tsinghua Mirror" + color_output "3. USTC Mirror" + color_output "4. University Union Mirror" + color_output "5. SUSTech Mirror" + color_output "6. Official Source" + color_output "0. Back" + read -p "Enter your choice [0-6]: " source_choice + fi + + # 仅支持 x86_64 和 aarch64 架构 + arch=$(uname -m) + case "$arch" in + "x86_64") + arch_name="x86_64" + target_core_url="https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/24.10.1/targets/x86/64/kmods/6.6.86-1-af351158cfb5febf5155a3aa53785982" + extras_url="https://opkg.cooluc.com/openwrt-24.10/x86_64" + ;; + "aarch64") + arch_name="aarch64_generic" + target_core_url="https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/24.10.1/targets/rockchip/armv8/kmods/6.6.86-1-a8e18e0ecc66cc99303d258424ec0db8" + extras_url="https://opkg.cooluc.com/openwrt-24.10/aarch64_generic" + ;; + *) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m仅支持 x86_64 和 aarch64 架构，当前架构为：$arch\e[0m" + else + color_output "\e[31mOnly x86_64 and aarch64 are supported, current arch: $arch\e[0m" + fi + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回菜单..." || echo "Press Enter to return to menu...")" + show_menu + return + ;; + esac + + # 镜像站选择 + case "$source_choice" in + 1) base_url="https://mirrors.aliyun.com/openwrt/releases/24.10.0/packages/$arch_name" ;; + 2) base_url="https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/24.10.0/packages/$arch_name" ;; + 3) base_url="https://mirrors.ustc.edu.cn/openwrt/releases/24.10.0/packages/$arch_name" ;; + 4) base_url="https://mirrors.xjtu.edu.cn/openwrt/releases/24.10.0/packages/$arch_name" ;; + 5) base_url="https://mirrors.sustech.edu.cn/openwrt/releases/24.10.0/packages/$arch_name" ;; + 6) base_url="https://downloads.openwrt.org/releases/24.10.0/packages/$arch_name" ;; + 0) show_menu; return ;; + *) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m无效选项，返回菜单。\e[0m" + else + color_output "\e[31mInvalid option, returning to menu.\e[0m" + fi + show_menu; return + ;; + esac + + # 生成 distfeeds.conf 文件 + cat < /etc/opkg/distfeeds.conf +src/gz openwrt_base $base_url/base +src/gz openwrt_luci $base_url/luci +src/gz openwrt_packages $base_url/packages +src/gz openwrt_routing $base_url/routing +src/gz openwrt_telephony $base_url/telephony +src/gz openwrt_core $target_core_url +src/gz openwrt_extras $extras_url +EOF + + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32m软件源已成功切换并追加自定义源。\e[0m" + read -p "按 Enter 键返回菜单..." + else + color_output "\e[32mSoftware sources changed successfully with custom sources added.\e[0m" + read -p "Press Enter to return to menu..." + fi + show_menu +} + +# 6. 一键部署 +install_apps() { + while true; do + clear + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[一键部署]\e[0m" + color_output "\e[36m┏━━━━━━━━━━━━━━━ 部署选项 ━━━━━━━━━━━━━━━┓\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┃\e[0m 1. 部署 ShellClash \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 2. 部署 小雅 Alist \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 3. 部署 Subconverter \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 4. 部署 AdGuardhome \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 5. 部署 Gitea-PostgreSQL \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 6. 部署 SunPanel导航页 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 0. 返回主菜单 \e[36m┃\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" + read -p "$(color_output "\e[33m请输入您的选择 [0-6]: \e[0m")" app_choice + else + color_output "\e[34m[One-click Deployment]\e[0m" + color_output "\e[36m┏━━━━━━━━━━━━━━━ DEPLOYMENT ━━━━━━━━━━━━━━━┓\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┃\e[0m 1. Deploy ShellClash \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 2. Deploy XiaoYa Alist \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 3. Deploy Subconverter \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 4. Deploy AdGuardhome \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 5. Deploy Gitea-PostgreSQL \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 6. Deploy SunPanel \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 0. Back to Main Menu \e[36m┃\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" + read -p "$(color_output "\e[33mEnter your choice [0-6]: \e[0m")" app_choice + fi + + case "$app_choice" in + 1) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[部署 ShellClash]\e[0m" + color_output "\e[36m请选择 ShellClash 的安装源：\e[0m" + color_output "1. GitHub 源" + color_output "2. jsDelivr CDN 源" + color_output "0. 返回" + read -p "请输入您的选择 [0-2]: " install_choice + else + color_output "\e[34m[Deploy ShellClash]\e[0m" + color_output "\e[36mSelect installation source:\e[0m" + color_output "1. GitHub Source" + color_output "2. jsDelivr CDN Source" + color_output "0. Back" + read -p "Enter your choice [0-2]: " install_choice + fi + + case "$install_choice" in + 1) export url='https://raw.githubusercontent.com/juewuy/ShellCrash/master' ;; + 2) export url='https://fastly.jsdelivr.net/gh/juewuy/ShellCrash@master' ;; + 0) continue ;; + *) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m无效选项\e[0m" + else + color_output "\e[31mInvalid option\e[0m" + fi + sleep 2 + continue + ;; + esac + + if [ "$install_choice" != "0" ]; then + sh -c "$(curl -kfsSl $url/install.sh)" && source /etc/profile &> /dev/null + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32mShellClash 已成功安装。\e[0m" + else + color_output "\e[32mShellClash installed successfully.\e[0m" + fi + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键继续..." || echo "Press Enter to continue...")" + fi + ;; + + 2) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[部署小雅 Alist]\e[0m" + color_output "\e[33m正在部署小雅 Alist...\e[0m" + else + color_output "\e[34m[Deploy XiaoYa Alist]\e[0m" + color_output "\e[33mDeploying XiaoYa Alist...\e[0m" + fi + bash -c "$(curl --insecure -fsSL https://ddsrem.com/xiaoya_install.sh)" + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32m小雅 Alist 安装完成。\e[0m" + else + color_output "\e[32mXiaoYa Alist installed successfully.\e[0m" + fi + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键继续..." || echo "Press Enter to continue...")" + ;; + 3) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[部署 Subconverter]\e[0m" + else + color_output "\e[34m[Deploy Subconverter]\e[0m" + fi + + # 检查 Docker 是否已安装 + if ! command -v docker &> /dev/null; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m未检测到 Docker，正在安装...\e[0m" + else + color_output "\e[33mDocker not found, installing...\e[0m" + fi + opkg update && opkg install docker + fi + + # 检查 Subconverter 是否已运行 + if docker ps | grep -q "subconverter"; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32mSubconverter 已经在运行\e[0m" + else + color_output "\e[32mSubconverter is already running\e[0m" + fi + + # 获取本机 IP 地址 + local_ip=$(ip addr show br-lan | grep -w inet | awk '{print $2}' | cut -d/ -f1) + + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[36m┏━━━━━━━━━━━━━━━ 配置模板 ━━━━━━━━━━━━━━━┓\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┃\e[0m 1. ACL4SSR_Online_Mini.ini \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 2. ACL4SSR_Online_Full.ini \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 3. ACL4SSR_Online.ini \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 0. 返回上一级 \e[36m┃\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" + read -p "$(color_output "\e[33m请输入选择 [0-3]: \e[0m")" template_choice + else + color_output "\e[36m┏━━━━━━━━━━━━━━━ CONFIG TEMPLATE ━━━━━━━━━━━━━━━┓\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┃\e[0m 1. ACL4SSR_Online_Mini.ini \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 2. ACL4SSR_Online_Full.ini \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 3. ACL4SSR_Online.ini \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 0. Back \e[36m┃\e[0m" + color_output "\e[36m┃ ┃\e[0m" + color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" + read -p "$(color_output "\e[33mEnter your choice [0-3]: \e[0m")" template_choice + fi + + case "$template_choice" in + 1) config_url="https://git.kejizero.online/zhao/rule/raw/branch/main/mihomo/ACL4SSR_Online_Mini.ini" ;; + 2) config_url="https://git.kejizero.online/zhao/rule/raw/branch/main/mihomo/ACL4SSR_Online_Full.ini" ;; + 3) config_url="https://git.kejizero.online/zhao/rule/raw/branch/main/mihomo/ACL4SSR_Online.ini" ;; + 0) continue ;; # 返回上一级 + *) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m无效选择\e[0m" + else + color_output "\e[31mInvalid choice\e[0m" + fi + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键继续..." || echo "Press Enter to continue...")" + continue + ;; + esac + + # 获取订阅链接 + if [[ "$LANG_CHOICE" == "zh" ]]; then + read -p "请输入订阅链接: " sub_url + else + read -p "Enter subscription URL: " sub_url + fi + + if [ -n "$sub_url" ]; then + # 生成完整的转换链接 + convert_url="http://${local_ip}:25500/sub?target=clash&insert=true&new_name=true&scv=true&url=${sub_url}&config=${config_url}" + + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32m转换链接已生成：\e[0m" + else + color_output "\e[32mConversion URL generated:\e[0m" + fi + color_output "\e[33m${convert_url}\e[0m" + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m订阅链接不能为空\e[0m" + else + color_output "\e[31mSubscription URL cannot be empty\e[0m" + fi + fi + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m正在部署 Subconverter...\e[0m" + else + color_output "\e[33mDeploying Subconverter...\e[0m" + fi + if docker run -d --restart=always -p 25500:25500 tindy2013/subconverter:latest; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32mSubconverter 部署成功！\e[0m" + else + color_output "\e[32mSubconverter deployed successfully!\e[0m" + fi + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31mSubconverter 部署失败\e[0m" + else + color_output "\e[31mSubconverter deployment failed\e[0m" + fi + fi + fi + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回..." || echo "Press Enter to return...")" + ;; + 4) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[部署 AdGuardHome]\e[0m" + else + color_output "\e[34m[Deploy AdGuardHome]\e[0m" + fi + + # 检查 Docker 是否已安装 + if ! command -v docker &> /dev/null; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m未检测到 Docker，正在安装...\e[0m" + else + color_output "\e[33mDocker not found, installing...\e[0m" + fi + opkg update && opkg install docker + fi + + # 获取本机 IP 地址 + local_ip=$(ip addr show br-lan | grep -w inet | awk '{print $2}' | cut -d/ -f1) + + # 检查 AdGuardHome 是否已运行 + if docker ps | grep -q "adguardhome"; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32mAdGuardHome 已经在运行！\e[0m" + color_output "\e[33m请使用浏览器访问：\e[0m" + else + color_output "\e[32mAdGuardHome is already running!\e[0m" + color_output "\e[33mAccess it at:\e[0m" + fi + color_output "\e[32mhttp://${local_ip}:3000\e[0m" + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m正在部署 AdGuardHome...\e[0m" + else + color_output "\e[33mDeploying AdGuardHome...\e[0m" + fi + + # 创建配置目录 + mkdir -p /root/adguardhome/work /root/adguardhome/conf + + # 部署 AdGuardHome + if docker run -d \ + --name adguardhome \ + -v /root/adguardhome/work:/opt/adguardhome/work \ + -v /root/adguardhome/conf:/opt/adguardhome/conf \ + -p 3000:3000 \ + --restart always \ + adguard/adguardhome; then + + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32m\nAdGuardHome 部署成功！\e[0m" + color_output "\e[33m请使用浏览器访问以下地址进行配置：\e[0m" + else + color_output "\e[32m\nAdGuardHome deployed successfully!\e[0m" + color_output "\e[33mAccess the following URL to configure:\e[0m" + fi + color_output "\e[32mhttp://${local_ip}:3000\e[0m" + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31mAdGuardHome 部署失败\e[0m" + else + color_output "\e[31mAdGuardHome deployment failed\e[0m" + fi + fi + fi + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回..." || echo "Press Enter to return...")" + ;; + 5) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[部署 Gitea-PostgreSQL]\e[0m" + else + color_output "\e[34m[Deploy Gitea-PostgreSQL]\e[0m" + fi + + # 检查 Gitea 容器是否已存在 + if docker ps -a | grep -q "gitea"; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33mGitea-MySQL 已经部署过，跳过部署！\e[0m" + else + color_output "\e[33mGitea-MySQL already deployed, skipping!\e[0m" + fi + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回..." || echo "Press Enter to return...")" + continue + fi + + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m正在部署 Gitea 和 PostgreSQL...\e[0m" + else + color_output "\e[33mDeploying Gitea and PostgreSQL...\e[0m" + fi + + # 创建目录 + mkdir -p /opt/Gitea + mkdir -p /opt/MySQL + + # 下载 Docker Compose 文件到 /opt/gitea + curl -L https://git.kejizero.online/zhao/docker-compose/raw/branch/main/Gitea -o /opt/Gitea/docker-compose.yml + + # 检查是否下载成功 + if [ -f "/opt/Gitea/docker-compose.yml" ]; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32mDocker Compose 文件下载成功！\e[0m" + else + color_output "\e[32mDocker Compose file downloaded successfully!\e[0m" + fi + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31mDocker Compose 文件下载失败！\e[0m" + else + color_output "\e[31mDocker Compose file download failed!\e[0m" + fi + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回..." || echo "Press Enter to return...")" + continue + fi + + # 部署 Gitea 和 PostgreSQL + cd /opt/Gitea + docker-compose up -d + + if docker ps | grep -q "gitea"; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32mGitea-PostgreSQL 部署成功！\e[0m" + else + color_output "\e[32mGitea-PostgreSQL deployed successfully!\e[0m" + fi + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31mGitea-PostgreSQL 部署失败！\e[0m" + else + color_output "\e[31mGitea-PostgreSQL deployment failed!\e[0m" + fi + fi + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回..." || echo "Press Enter to return...")" + ;; + 6) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[部署 sun-panel]\e[0m" + else + color_output "\e[34m[Deploy sun-panel]\e[0m" + fi + + # 检查 SunPanel 容器是否已存在 + if docker ps -a --filter "name=sun-panel" | grep -q "sun-panel"; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33msun-panel 已经部署过，跳过部署！\e[0m" + else + color_output "\e[33msun-panel already deployed, skipping!\e[0m" + fi + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回..." || echo "Press Enter to return...")" + continue + fi + + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m正在部署 SunPanel...\e[0m" + else + color_output "\e[33mDeploying SunPanel...\e[0m" + fi + + # 创建目录 + mkdir -p /opt/sunpanel + + # 下载 Docker Compose 文件到 /opt/sunpanel + curl -v -L https://git.kejizero.online/zhao/docker-compose/raw/branch/main/SunPanel -o /opt/sunpanel/docker-compose.yml + + # 检查是否下载成功 + if [ -f "/opt/sunpanel/docker-compose.yml" ]; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32mDocker Compose 文件下载成功！\e[0m" + else + color_output "\e[32mDocker Compose file downloaded successfully!\e[0m" + fi + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31mDocker Compose 文件下载失败！\e[0m" + else + color_output "\e[31mDocker Compose file download failed!\e[0m" + fi + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回..." || echo "Press Enter to return...")" + continue + fi + + # 部署 SunPanel + cd /opt/sunpanel + docker-compose up -d + + if docker ps | grep -q "sun-panel"; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32msun-panel 部署成功！\e[0m" + else + color_output "\e[32msun-panel deployed successfully!\e[0m" + fi + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31msun-panel 部署失败！\e[0m" + else + color_output "\e[31msun-panel deployment failed!\e[0m" + fi + docker logs $(docker ps -a -q --filter "name=sun-panel") # 查看失败的容器日志 + fi + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回..." || echo "Press Enter to return...")" + ;; + 0) + show_menu + return + ;; + *) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m无效选项，请重新选择\e[0m" + else + color_output "\e[31mInvalid option, please try again\e[0m" + fi + sleep 2 + ;; + esac + done +} +# 7. 加载驱动 +Load_driver() { + while true; do + clear + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[一键加载驱动]\e[0m" + color_output "\e[36m┏━━━━━━━━━━━━━━━ 驱动分类 (按品牌) ━━━━━━━━━━━━━━━┓\e[0m" + color_output "\e[36m┃                                              ┃\e[0m" + color_output "\e[36m┃\e[0m  1. 高通/Atheros (无线 Wi-Fi 芯片)              \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m  2. 博通/Cypress (无线 Wi-Fi 芯片)              \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m  3. 英特尔 (无线 Wi-Fi 芯片)                    \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m  4. 联发科 (无线 Wi-Fi 芯片)                    \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m  5. 瑞昱 (无线/有线网卡芯片)                    \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m  6. USB/文件系统及其他通用驱动                  \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m  0. 返回主菜单                                \e[36m┃\e[0m" + color_output "\e[36m┃                                              ┃\e[0m" + color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" + read -p "$(color_output "\e[33m请选择要安装的驱动分类 [0-6]: \e[0m")" driver_category_choice + else + color_output "\e[34m[One-click Driver Loading]\e[0m" + color_output "\e[36m┏━━━━━━━━━━━━━━━ DRIVER CATEGORIES (BY BRAND) ━━━━━━━━━━━┓\e[0m" + color_output "\e[36m┃                                                        ┃\e[0m" + color_output "\e[36m┃\e[0m  1. Qualcomm/Atheros (Wireless Wi-Fi Chips)            \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m  2. Broadcom/Cypress (Wireless Wi-Fi Chips)            \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m  3. Intel (Wireless Wi-Fi Chips)                       \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m  4. MediaTek (Wireless Wi-Fi Chips)                    \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m  5. Realtek (Wireless/Wired NIC Chips)                 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m  6. USB/File Systems & Other General Drivers           \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m  0. Back to Main Menu                                  \e[36m┃\e[0m" + color_output "\e[36m┃                                                        ┃\e[0m" + color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" + read -p "$(color_output "\e[33mSelect driver category to install [0-6]: \e[0m")" driver_category_choice + fi + + local drivers_to_install=() + + case "$driver_category_choice" in + 1) # 高通/Atheros (无线 Wi-Fi 芯片) + drivers_to_install=( + ath10k-firmware-qca4019 + ath10k-firmware-qca6174 + ath10k-firmware-qca9377 + ath10k-firmware-qca9887 + ath10k-firmware-qca9888 + ath10k-firmware-qca988x + ath10k-firmware-qca9984 + ath10k-firmware-qca99x0 + ath11k-firmware-ipq8074 + ath11k-firmware-qca6390 + ath11k-firmware-qcn9074 + ath11k-firmware-wcn6750 + ath11k-firmware-wcn6855 + ath12k-firmware-wcn7850 + ath6k-firmware + ath9k-htc-firmware + kmod-ath10k + kmod-ath11k + kmod-ath11k-pci + kmod-ath12k + kmod-ath5k + kmod-ath6kl + kmod-ath6kl-sdio + kmod-ath6kl-usb + kmod-ath9k-common + kmod-alx + kmod-atl1 + kmod-atl1c + kmod-atl1e + kmod-atl2 + ) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m提示：此类别包含高通和Atheros无线芯片组的驱动和固件。请根据您的设备芯片型号选择。\e[0m" + else + color_output "\e[33mNote: This category includes drivers and firmware for Qualcomm and Atheros wireless chipsets. Please choose based on your device's chip model.\e[0m" + fi + ;; + 2) # 博通/Cypress (无线 Wi-Fi 芯片) + drivers_to_install=( + brcmfmac-firmware-43430a0-sdio + brcmfmac-firmware-43455-sdio + brcmfmac-firmware-43602a1-pcie + brcmfmac-firmware-4366b1-pcie + brcmfmac-firmware-4366c0-pcie + brcmfmac-firmware-usb + brcmfmac-nvram-43430-sdio + brcmfmac-nvram-43455-sdio + brcmsmac-firmware + cypress-firmware-43430-sdio + cypress-firmware-43455-sdio + cypress-firmware-4354-sdio + cypress-firmware-4356-pcie + cypress-firmware-4356-sdio + cypress-firmware-4373-pcie + cypress-firmware-4373-sdio + kmod-b43 + kmod-b44 + kmod-bcma + kmod-brcmfmac + kmod-brcmutil + kmod-be2net + kmod-ssb + kmod-tg3 + ) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m提示：此类别包含博通和Cypress无线芯片组的驱动和固件。请根据您的设备芯片型号选择。\e[0m" + else + color_output "\e[33mNote: This category includes drivers and firmware for Broadcom and Cypress wireless chipsets. Please choose based on your device's chip model.\e[0m" + fi + ;; + 3) # 英特尔 (无线 Wi-Fi 芯片) + drivers_to_install=( + iwlwifi-firmware-ax200 + iwlwifi-firmware-ax210 + iwlwifi-firmware-iwl1000 + iwlwifi-firmware-iwl100 + iwlwifi-firmware-iwl105 + iwlwifi-firmware-iwl135 + iwlwifi-firmware-iwl2000 + iwlwifi-firmware-iwl2030 + iwlwifi-firmware-iwl3160 + iwlwifi-firmware-iwl3168 + iwlwifi-firmware-iwl5000 + iwlwifi-firmware-iwl5150 + iwlwifi-firmware-iwl6000g2 + iwlwifi-firmware-iwl6000g2a + iwlwifi-firmware-iwl6000g2b + iwlwifi-firmware-iwl6050 + iwlwifi-firmware-iwl7260 + iwlwifi-firmware-iwl7265 + iwlwifi-firmware-iwl8260c + iwlwifi-firmware-iwl8265 + iwlwifi-firmware-iwl9000 + iwlwifi-firmware-iwl9260 + kmod-iwlwifi + kmod-e1000e + ) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m提示：此类别包含英特尔无线芯片组的驱动和固件。请根据您的设备芯片型号选择。\e[0m" + else + color_output "\e[33mNote: This category includes drivers and firmware for Intel wireless chipsets. Please choose based on your device's chip model.\e[0m" + fi + ;; + 4) # 联发科 (无线 Wi-Fi 芯片) + drivers_to_install=( + mt7601u-firmware + mt7622bt-firmware + mt7921bt-firmware + mt7922bt-firmware + kmod-mt7601u + kmod-mt7603 + kmod-mt7615-common + kmod-mt7615e + kmod-mt7615-firmware + kmod-mt7622-firmware + kmod-mt7663-firmware-ap + kmod-mt7663-firmware-sta + kmod-mt7663s + kmod-mt7663u + kmod-mt76-core + kmod-mt76x0e + kmod-mt76x2-common + kmod-mt7915e + kmod-mt7925e + kmod-mt7925-firmware + kmod-rt2800-lib + kmod-rt2800-pci + kmod-rt2800-usb + kmod-rt2x00-lib + kmod-rt2x00-pci + kmod-rt2x00-usb + ) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m提示：此类别包含联发科无线芯片组的驱动和固件。Ralink旧型号也在此处。\e[0m" + else + color_output "\e[33mNote: This category includes drivers and firmware for MediaTek wireless chipsets. Older Ralink models are also here.\e[0m" + fi + ;; + 5) # 瑞昱 (无线/有线网卡芯片) + drivers_to_install=( + r8152-firmware + r8169-firmware + rtl8188eu-firmware + rtl8192ce-firmware + rtl8192cu-firmware + rtl8192eu-firmware + rtl8192se-firmware + rtl8723au-firmware + rtl8723bu-firmware + rtl8821ae-firmware + rtl8821ce-firmware + rtl8822be-firmware + rtl8822ce-firmware + kmod-r8169 + kmod-rtl8192c-common + kmod-rtl8192ce + kmod-rtl8192cu + kmod-rtl8192de + kmod-rtl8192se + kmod-rtl8723bs + kmod-rtl8821ae + kmod-rtl8xxxu + kmod-rtlwifi + kmod-rtlwifi-pci + kmod-rtlwifi-usb + kmod-rtw88 + kmod-rtw88-8723de + kmod-rtw88-8821ce + kmod-rtw88-8822be + kmod-rtw88-8822ce + kmod-phy-realtek + ) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m提示：此类别包含瑞昱无线和有线网卡芯片的驱动和固件。\e[0m" + else + color_output "\e[33mNote: This category includes drivers and firmware for Realtek wireless and wired network card chipsets.\e[0m" + fi + ;; + 6) # USB/文件系统及其他通用驱动 (非特定品牌) + drivers_to_install=( + kmod-usb-core + kmod-usb-ohci + kmod-usb-uhci + kmod-usb2 + kmod-usb3 + kmod-usb-net + kmod-usb-net-cdc-ether + kmod-usb-storage + kmod-fs-ext4 + kmod-fs-ntfs + kmod-fs-vfat + kmod-fs-exfat + kmod-fs-cifs + kmod-mac80211 + kmod-phy-broadcom + kmod-phylib-broadcom + kmod-phy-marvell-10g + kmod-phy-microchip + kmod-phy-smsc + kmod-sfp + kmod-swconfig + kmod-thermal + kmod-mdio-gpio + kmod-mii + kmod-phy-airoha-en8811h + kmod-phy-aquantia + kmod-phy-at803x + ) + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m提示：此类别包含USB、文件系统以及其他不属于特定网络芯片品牌的通用驱动和固件。\e[0m" + else + color_output "\e[33mNote: This category includes USB, file system, and other general drivers/firmware not tied to specific network chip brands.\e[0m" + fi + ;; + 0) # 返回主菜单 + show_menu + return + ;; + *) # 无效选项 + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m无效选项，请重新输入。\e[0m" + else + color_output "\e[31mInvalid option, please try again.\e[0m" + fi + sleep 2 + continue + ;; + esac + + if [ ${#drivers_to_install[@]} -eq 0 ]; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m未选择任何驱动进行安装。\e[0m" + else + color_output "\e[31mNo drivers selected for installation.\e[0m" + fi + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回..." || echo "Press Enter to return...")" + continue # 返回驱动分类菜单 + fi + + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m即将安装以下驱动：\e[0m" + for d in "${drivers_to_install[@]}"; do + color_output " - $d" + done + read -p "确定要开始安装吗？(y/n): " confirm_install + else + color_output "\e[33mAbout to install the following drivers:\e[0m" + for d in "${drivers_to_install[@]}"; do + color_output " - $d" + done + read -p "Are you sure you want to start installation? (y/n): " confirm_install + fi + + if [[ "$confirm_install" == "y" || "$confirm_install" == "Y" ]]; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m正在更新软件包列表并安装驱动...\e[0m" + else + color_output "\e[33mUpdating package list and installing drivers...\e[0m" + fi + opkg update + + local all_success=true + for driver in "${drivers_to_install[@]}"; do + if opkg install "$driver"; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32m驱动 $driver 已成功安装。\e[0m" + else + color_output "\e[32mDriver $driver installed successfully.\e[0m" + fi + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m驱动 $driver 安装失败或已存在。请检查驱动名称和您的ZeroWrt版本。\e[0m" + else + color_output "\e[31mDriver $driver installation failed or already exists. Please check the driver name and your ZeroWrt version.\e[0m" + fi + all_success=false + fi + done + + if $all_success; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32m所选驱动已全部安装完成。\e[0m" + else + color_output "\e[32mAll selected drivers installed successfully.\e[0m" + fi + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m部分驱动安装失败，请查看上方日志。\e[0m" + else + color_output "\e[31mSome drivers failed to install, please check the log above.\e[0m" + fi + fi + + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m部分驱动可能需要重启后才能完全生效。\e[0m" + read -p "是否立即重启？(y/n): " reboot_confirm + else + color_output "\e[33mSome drivers may require a reboot to take full effect.\e[0m" + read -p "Reboot now? (y/n): " reboot_confirm + fi + + if [[ "$reboot_confirm" == "y" || "$reboot_confirm" == "Y" ]]; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m设备将在 5 秒钟后重启...\e[0m" + else + color_output "\e[33mDevice will reboot in 5 seconds...\e[0m" + fi + sleep 5 + reboot + fi + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32m驱动安装操作已取消。\e[0m" + else + color_output "\e[32mDriver installation operation cancelled.\e[0m" + fi + fi + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回菜单..." || echo "Press Enter to return to menu...")" + show_menu + done +} + +# 8. IPv6 配置向导 +ipv6_wizard() { + echo + echo + echo + color_output "\e[34m[IPv6 配置向导]\e[0m" "\e[34m[IPv6 Configuration Wizard]\e[0m" + + # 检查当前状态 + local current_ra=$(uci -q get dhcp.lan.ra) + local current_dhcpv6=$(uci -q get dhcp.lan.dhcpv6) + local current_ndp=$(uci -q get dhcp.lan.ndp) + local current_filter_aaaa=$(uci -q get dhcp.@dnsmasq[0].filter_aaaa) + + if [ "$current_ra" = "server" ] && [ "$current_dhcpv6" = "server" ]; then + status_text=$([[ "$LANG_CHOICE" == "zh" ]] && echo "已开启" || echo "Enabled") + status_color="\e[32m" + else + status_text=$([[ "$LANG_CHOICE" == "zh" ]] && echo "已关闭" || echo "Disabled") + status_color="\e[31m" + fi + + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "当前 IPv6 状态:"; else echo "Current IPv6 Status:"; fi) $status_color$status_text\e[0m" + + # 检查是否为 PPPoE 模式 + local wan_proto=$(uci -q get network.wan.proto) + if [ "$wan_proto" != "pppoe" ]; then + color_output "\e[33m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "注意: 当前上网方式为 $wan_proto，建议使用 PPPoE 模式获取 IPv6"; else echo "Note: Current connection type is $wan_proto, PPPoE is recommended for IPv6"; fi)\e[0m" + fi + + echo + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请选择操作："; else echo "Select operation:"; fi)\e[0m" + color_output "1. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "开启 IPv6 功能"; else echo "Enable IPv6"; fi)" + color_output "2. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "关闭 IPv6 功能"; else echo "Disable IPv6"; fi)" + color_output "3. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "高级 IPv6 设置"; else echo "Advanced IPv6 Settings"; fi)" + color_output "0. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "返回IPv6 配置向导"; else echo "Back to Wizard"; fi)" + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入选择 [0-3]: "; else echo "Enter your choice [0-3]: "; fi)" ipv6_choice + + case "$ipv6_choice" in + 1) + # 开启 IPv6 + enable_ipv6 + ;; + 2) + # 关闭 IPv6 + disable_ipv6 + ;; + 3) + # 高级设置 + advanced_ipv6_settings + ;; + 0) + show_menu + return + ;; + *) + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效选择"; else echo "Invalid choice"; fi)\e[0m" + sleep 1 + ipv6_wizard + return + ;; + esac + + ipv6_wizard +} + +# 启用 IPv6 功能 +enable_ipv6() { + # RA 服务设置为服务模式 + uci set dhcp.lan.ra='server' + # DHCPv6 服务设置为服务模式 + uci set dhcp.lan.dhcpv6='server' + # IPv6 分配长度设置为64 + uci set dhcp.lan.ndp='64' + # 取消过滤 IPv6 AAAA 记录 + uci set dhcp.@dnsmasq[0].filter_aaaa='0' + # 保存设置 + uci commit dhcp + + # 重启相关服务 + /etc/init.d/odhcpd restart >/dev/null 2>&1 + /etc/init.d/dnsmasq restart >/dev/null 2>&1 + + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then + echo "IPv6 已开启！" + echo "- RA 服务: 服务模式" + echo "- DHCPv6 服务: 服务模式" + echo "- IPv6 分配长度: 64" + echo "- IPv6 AAAA 记录过滤: 已关闭" + else + echo "IPv6 enabled!" + echo "- RA Service: server" + echo "- DHCPv6 Service: server" + echo "- IPv6 Prefix Length: 64" + echo "- IPv6 AAAA Filtering: disabled" + fi)\e[0m" +} + +# 禁用 IPv6 功能 +disable_ipv6() { + # RA 服务设置为已禁用 + uci set dhcp.lan.ra='disabled' + # DHCPv6 服务设置为已禁用 + uci set dhcp.lan.dhcpv6='disabled' + # IPv6 分配长度设置为已禁用 + uci set dhcp.lan.ndp='disabled' + # 开启过滤 IPv6 AAAA 记录 + uci set dhcp.@dnsmasq[0].filter_aaaa='1' + # 保存设置 + uci commit dhcp + + # 重启相关服务 + /etc/init.d/odhcpd restart >/dev/null 2>&1 + /etc/init.d/dnsmasq restart >/dev/null 2>&1 + + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then + echo "IPv6 已关闭！" + echo "- RA 服务: 已禁用" + echo "- DHCPv6 服务: 已禁用" + echo "- IPv6 分配长度: 已禁用" + echo "- IPv6 AAAA 记录过滤: 已开启" + else + echo "IPv6 disabled!" + echo "- RA Service: disabled" + echo "- DHCPv6 Service: disabled" + echo "- IPv6 Prefix Length: disabled" + echo "- IPv6 AAAA Filtering: enabled" + fi)\e[0m" +} + +# 高级 IPv6 设置 +advanced_ipv6_settings() { + echo + color_output "\e[34m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "[高级 IPv6 设置]"; else echo "[Advanced IPv6 Settings]"; fi)\e[0m" + + # 获取当前设置 + local current_ra=$(uci -q get dhcp.lan.ra) + local current_dhcpv6=$(uci -q get dhcp.lan.dhcpv6) + local current_ndp=$(uci -q get dhcp.lan.ndp) + local current_filter_aaaa=$(uci -q get dhcp.@dnsmasq[0].filter_aaaa) + + # 显示当前设置 + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "当前设置："; else echo "Current settings:"; fi)\e[0m" + color_output "1. RA: $current_ra" + color_output "2. DHCPv6: $current_dhcpv6" + color_output "3. NDP: $current_ndp" + color_output "4. Filter AAAA: $current_filter_aaaa" + + echo + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请选择要修改的选项："; else echo "Select option to modify:"; fi)\e[0m" + color_output "1. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置 RA 服务"; else echo "Configure RA service"; fi)" + color_output "2. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置 DHCPv6 服务"; else echo "Configure DHCPv6 service"; fi)" + color_output "3. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置 IPv6 前缀长度"; else echo "Configure IPv6 prefix length"; fi)" + color_output "4. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置 AAAA 记录过滤"; else echo "Configure AAAA record filtering"; fi)" + color_output "0. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "返回"; else echo "Back"; fi)" + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入选择 [0-4]: "; else echo "Enter your choice [0-4]: "; fi)" advanced_choice + + case "$advanced_choice" in + 1) + configure_ra_service + ;; + 2) + configure_dhcpv6_service + ;; + 3) + configure_ndp + ;; + 4) + configure_aaaa_filter + ;; + 0) + return + ;; + *) + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效选择"; else echo "Invalid choice"; fi)\e[0m" + ;; + esac + + # 保存并应用更改 + uci commit dhcp + /etc/init.d/odhcpd restart >/dev/null 2>&1 + /etc/init.d/dnsmasq restart >/dev/null 2>&1 + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "按 Enter 键继续..."; else echo "Press Enter to continue..."; fi)" + advanced_ipv6_settings +} + +# 配置 RA 服务 +configure_ra_service() { + echo + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "RA 服务选项："; else echo "RA Service Options:"; fi)\e[0m" + color_output "1. server - $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "作为 RA 服务器"; else echo "Act as RA server"; fi)" + color_output "2. relay - $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "作为 RA 中继"; else echo "Act as RA relay"; fi)" + color_output "3. disabled - $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "禁用 RA 服务"; else echo "Disable RA service"; fi)" + color_output "0. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "取消"; else echo "Cancel"; fi)" + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请选择 RA 服务模式: "; else echo "Select RA service mode: "; fi)" ra_mode + + case "$ra_mode" in + 1) + uci set dhcp.lan.ra='server' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "RA 服务已设置为服务器模式"; else echo "RA service set to server mode"; fi)\e[0m" + ;; + 2) + uci set dhcp.lan.ra='relay' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "RA 服务已设置为中继模式"; else echo "RA service set to relay mode"; fi)\e[0m" + ;; + 3) + uci set dhcp.lan.ra='disabled' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "RA 服务已禁用"; else echo "RA service disabled"; fi)\e[0m" + ;; + 0) + return + ;; + *) + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效选择"; else echo "Invalid choice"; fi)\e[0m" + ;; + esac +} + +# 配置 DHCPv6 服务 +configure_dhcpv6_service() { + echo + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "DHCPv6 服务选项："; else echo "DHCPv6 Service Options:"; fi)\e[0m" + color_output "1. server - $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "作为 DHCPv6 服务器"; else echo "Act as DHCPv6 server"; fi)" + color_output "2. relay - $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "作为 DHCPv6 中继"; else echo "Act as DHCPv6 relay"; fi)" + color_output "3. disabled - $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "禁用 DHCPv6 服务"; else echo "Disable DHCPv6 service"; fi)" + color_output "0. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "取消"; else echo "Cancel"; fi)" + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请选择 DHCPv6 服务模式: "; else echo "Select DHCPv6 service mode: "; fi)" dhcpv6_mode + + case "$dhcpv6_mode" in + 1) + uci set dhcp.lan.dhcpv6='server' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "DHCPv6 服务已设置为服务器模式"; else echo "DHCPv6 service set to server mode"; fi)\e[0m" + ;; + 2) + uci set dhcp.lan.dhcpv6='relay' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "DHCPv6 服务已设置为中继模式"; else echo "DHCPv6 service set to relay mode"; fi)\e[0m" + ;; + 3) + uci set dhcp.lan.dhcpv6='disabled' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "DHCPv6 服务已禁用"; else echo "DHCPv6 service disabled"; fi)\e[0m" + ;; + 0) + return + ;; + *) + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效选择"; else echo "Invalid choice"; fi)\e[0m" + ;; + esac +} + +# 配置 NDP +configure_ndp() { + echo + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入 IPv6 前缀长度 (默认 64): "; else echo "Enter IPv6 prefix length (default 64): "; fi)" prefix_length + + if [[ -z "$prefix_length" ]]; then + prefix_length="64" + fi + + if [[ "$prefix_length" =~ ^[0-9]+$ ]] && [ "$prefix_length" -ge 48 ] && [ "$prefix_length" -le 128 ]; then + uci set dhcp.lan.ndp="$prefix_length" + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "IPv6 前缀长度已设置为 $prefix_length"; else echo "IPv6 prefix length set to $prefix_length"; fi)\e[0m" + else + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效的前缀长度 (48-128)"; else echo "Invalid prefix length (48-128)"; fi)\e[0m" + fi +} + +# 配置 AAAA 记录过滤 +configure_aaaa_filter() { + echo + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "AAAA 记录过滤选项："; else echo "AAAA Record Filtering Options:"; fi)\e[0m" + color_output "1. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "启用 AAAA 记录过滤"; else echo "Enable AAAA record filtering"; fi)" + color_output "2. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "禁用 AAAA 记录过滤"; else echo "Disable AAAA record filtering"; fi)" + color_output "0. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "取消"; else echo "Cancel"; fi)" + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请选择: "; else echo "Select option: "; fi)" aaaa_choice + + case "$aaaa_choice" in + 1) + uci set dhcp.@dnsmasq[0].filter_aaaa='1' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "AAAA 记录过滤已启用"; else echo "AAAA record filtering enabled"; fi)\e[0m" + ;; + 2) + uci set dhcp.@dnsmasq[0].filter_aaaa='0' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "AAAA 记录过滤已禁用"; else echo "AAAA record filtering disabled"; fi)\e[0m" + ;; + 0) + return + ;; + *) + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效选择"; else echo "Invalid choice"; fi)\e[0m" + ;; + esac +} + +# 9. 网络模式配置向导 +network_mode_wizard() { + echo + color_output "\e[34m[网络模式配置向导]\e[0m" "\e[34m[Network Mode Configuration Wizard]\e[0m" + + # 获取当前WAN口配置 + local current_proto=$(uci -q get network.wan.proto) + local current_username=$(uci -q get network.wan.username) + local current_ipaddr=$(uci -q get network.lan.ipaddr) + + # 显示当前配置 + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "当前网络配置："; else echo "Current network configuration:"; fi)\e[0m" + color_output "1. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "连接模式:"; else echo "Connection mode:"; fi) $current_proto" + + if [ "$current_proto" == "pppoe" ]; then + color_output "2. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "PPPoE账号:"; else echo "PPPoE username:"; fi) $current_username" + fi + + color_output "3. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "LAN IP地址:"; else echo "LAN IP address:"; fi) $current_ipaddr" + + echo + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请选择操作："; else echo "Select operation:"; fi)\e[0m" + color_output "1. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置PPPoE拨号"; else echo "Configure PPPoE"; fi)" + color_output "2. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置DHCP客户端"; else echo "Configure DHCP client"; fi)" + color_output "3. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置静态IP"; else echo "Configure static IP"; fi)" + color_output "4. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "高级网络设置"; else echo "Advanced network settings"; fi)" + color_output "0. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "返回主菜单"; else echo "Back to Main Menu"; fi)" + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入选择 [0-4]: "; else echo "Enter your choice [0-4]: "; fi)" mode_choice + + case "$mode_choice" in + 1) + configure_pppoe + ;; + 2) + configure_dhcp_client + ;; + 3) + configure_static_ip + ;; + 4) + advanced_network_settings + ;; + 0) + show_menu + return + ;; + *) + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效选择"; else echo "Invalid choice"; fi)\e[0m" + ;; + esac + + # 应用网络配置 + uci commit network + /etc/init.d/network restart + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "按Enter键返回网络向导..."; else echo "Press Enter to return to network wizard..."; fi)" + network_mode_wizard +} + +# 配置PPPoE拨号 +configure_pppoe() { + echo + color_output "\e[34m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "[PPPoE配置]"; else echo "[PPPoE Configuration]"; fi)\e[0m" + + # 获取当前PPPoE配置 + local current_username=$(uci -q get network.wan.username) + local current_password=$(uci -q get network.wan.password) + + # 显示当前配置（隐藏密码） + if [ -n "$current_username" ]; then + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "当前PPPoE账号:"; else echo "Current PPPoE username:"; fi) $current_username\e[0m" + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "当前PPPoE密码:"; else echo "Current PPPoE password:"; fi) ********\e[0m" + else + color_output "\e[33m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "未配置PPPoE"; else echo "PPPoE not configured"; fi)\e[0m" + fi + + echo + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入PPPoE账号(留空保持不变): "; else echo "Enter PPPoE username (leave blank to keep current): "; fi)" pppoe_username + read -s -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入PPPoE密码(留空保持不变): "; else echo "Enter PPPoE password (leave blank to keep current): "; fi)" pppoe_password + echo + + # 设置PPPoE配置 + uci set network.wan.proto='pppoe' + [ -n "$pppoe_username" ] && uci set network.wan.username="$pppoe_username" + [ -n "$pppoe_password" ] && uci set network.wan.password="$pppoe_password" + + # 设置MTU和MRU（优化PPPoE连接） + uci set network.wan.mtu='1492' + uci set network.wan.mru='1492' + + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "PPPoE配置已更新！"; else echo "PPPoE configuration updated!"; fi)\e[0m" + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "连接模式已设置为PPPoE"; else echo "Connection mode set to PPPoE"; fi)\e[0m" +} + +# 配置DHCP客户端 +configure_dhcp_client() { + echo + color_output "\e[34m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "[DHCP客户端配置]"; else echo "[DHCP Client Configuration]"; fi)\e[0m" + + # 设置DHCP客户端 + uci set network.wan.proto='dhcp' + + # 清除PPPoE配置（如果存在） + uci delete network.wan.username >/dev/null 2>&1 + uci delete network.wan.password >/dev/null 2>&1 + + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "DHCP客户端配置已更新！"; else echo "DHCP client configuration updated!"; fi)\e[0m" + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "连接模式已设置为DHCP客户端"; else echo "Connection mode set to DHCP client"; fi)\e[0m" +} + +# 配置静态IP +configure_static_ip() { + echo + color_output "\e[34m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "[静态IP配置]"; else echo "[Static IP Configuration]"; fi)\e[0m" + + # 获取当前配置 + local current_ip=$(uci -q get network.wan.ipaddr) + local current_netmask=$(uci -q get network.wan.netmask) + local current_gateway=$(uci -q get network.wan.gateway) + local current_dns=$(uci -q get network.wan.dns) + + # 显示当前配置 + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "当前静态IP配置："; else echo "Current static IP configuration:"; fi)\e[0m" + color_output "1. IP地址: ${current_ip:-未设置}" + color_output "2. 子网掩码: ${current_netmask:-未设置}" + color_output "3. 网关: ${current_gateway:-未设置}" + color_output "4. DNS服务器: ${current_dns:-未设置}" + + echo + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入IP地址: "; else echo "Enter IP address: "; fi)" static_ip + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入子网掩码(默认255.255.255.0): "; else echo "Enter netmask (default 255.255.255.0): "; fi)" static_netmask + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入网关: "; else echo "Enter gateway: "; fi)" static_gateway + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入DNS服务器(多个用空格分隔): "; else echo "Enter DNS servers (separate with spaces): "; fi)" static_dns + + # 设置默认值 + [ -z "$static_netmask" ] && static_netmask="255.255.255.0" + + # 验证输入 + if ! [[ $static_ip =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}$ ]] || + ! [[ $static_netmask =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}$ ]] || + ! [[ $static_gateway =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}$ ]]; then + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效的IP地址、子网掩码或网关"; else echo "Invalid IP address, netmask or gateway"; fi)\e[0m" + return + fi + + # 设置静态IP配置 + uci set network.wan.proto='static' + uci set network.wan.ipaddr="$static_ip" + uci set network.wan.netmask="$static_netmask" + uci set network.wan.gateway="$static_gateway" + [ -n "$static_dns" ] && uci set network.wan.dns="$static_dns" + + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "静态IP配置已更新！"; else echo "Static IP configuration updated!"; fi)\e[0m" +} + +# 高级网络设置 +advanced_network_settings() { + echo + color_output "\e[34m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "[高级网络设置]"; else echo "[Advanced Network Settings]"; fi)\e[0m" + + # 获取当前MTU和DNS设置 + local current_mtu=$(uci -q get network.wan.mtu) + local current_dns=$(uci -q get network.wan.dns) + local current_hostname=$(uci -q get system.@system[0].hostname) + + # 显示当前设置 + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "当前高级设置："; else echo "Current advanced settings:"; fi)\e[0m" + color_output "1. MTU: ${current_mtu:-默认}" + color_output "2. DNS服务器: ${current_dns:-默认}" + color_output "3. 主机名: ${current_hostname:-默认}" + + echo + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请选择要配置的选项："; else echo "Select option to configure:"; fi)\e[0m" + color_output "1. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置MTU"; else echo "Configure MTU"; fi)" + color_output "2. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置自定义DNS"; else echo "Configure custom DNS"; fi)" + color_output "3. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置主机名"; else echo "Configure hostname"; fi)" + color_output "0. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "返回"; else echo "Back"; fi)" + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入选择 [0-3]: "; else echo "Enter your choice [0-3]: "; fi)" advanced_choice + + case "$advanced_choice" in + 1) + configure_mtu + ;; + 2) + configure_custom_dns + ;; + 3) + configure_hostname + ;; + 0) + network_mode_wizard + return + ;; + *) + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效选择"; else echo "Invalid choice"; fi)\e[0m" + ;; + esac + + # 保存并应用更改 + uci commit network + uci commit system + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "按Enter键继续..."; else echo "Press Enter to continue..."; fi)" + advanced_network_settings +} + +# 配置MTU +configure_mtu() { + echo + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入MTU值(默认1500，PPPoE建议1492): "; else echo "Enter MTU value (default 1500, PPPoE recommends 1492): "; fi)" mtu_value + + if [[ "$mtu_value" =~ ^[0-9]+$ ]] && [ "$mtu_value" -ge 576 ] && [ "$mtu_value" -le 1500 ]; then + uci set network.wan.mtu="$mtu_value" + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "MTU已设置为$mtu_value"; else echo "MTU set to $mtu_value"; fi)\e[0m" + else + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效的MTU值(576-1500)"; else echo "Invalid MTU value (576-1500)"; fi)\e[0m" + fi +} + +# 配置自定义DNS +configure_custom_dns() { + echo + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入DNS服务器(多个用空格分隔): "; else echo "Enter DNS servers (separate with spaces): "; fi)" dns_servers + + if [[ $dns_servers =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}(\s+([0-9]{1,3}\.){3}[0-9]{1,3})*$ ]]; then + uci set network.wan.dns="$dns_servers" + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "DNS服务器已更新"; else echo "DNS servers updated"; fi)\e[0m" + else + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效的DNS格式"; else echo "Invalid DNS format"; fi)\e[0m" + fi +} + +# 配置主机名 +configure_hostname() { + echo + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入主机名: "; else echo "Enter hostname: "; fi)" new_hostname + + if [ -n "$new_hostname" ]; then + uci set system.@system[0].hostname="$new_hostname" + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "主机名已设置为$new_hostname"; else echo "Hostname set to $new_hostname"; fi)\e[0m" + else + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "主机名不能为空"; else echo "Hostname cannot be empty"; fi)\e[0m" + fi +} + +# 10. iStoreOS 风格化 +istore_style() { + clear + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[开始安装 iStoreOS 风格化]\e[0m" + else + color_output "\e[34m[Installing iStoreOS Styling]\e[0m" + fi + + # 安装 iStore 商店 + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[1/3] 正在安装 iStore 商店...\e[0m" + else + color_output "\e[34m[1/3] Installing iStore App Store...\e[0m" + fi + wget -qO install.sh https://git.kejizero.online/zhao/iStoreOS/raw/branch/main/install.sh && chmod +x install.sh && ./install.sh + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32miStore 商店安装完成\e[0m" + else + color_output "\e[32miStore App Store installed\e[0m" + fi + + # 安装网络向导和首页 + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[2/3] 正在安装网络向导和首页...\e[0m" + else + color_output "\e[34m[2/3] Installing QuickStart and Homepage...\e[0m" + fi + is-opkg install luci-i18n-quickstart-zh-cn + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32m网络向导和首页安装完成\e[0m" + color_output "\e[32m所有组件安装完成！\e[0m" + else + color_output "\e[32mQuickStart and Homepage installed\e[0m" + color_output "\e[32mAll components installed successfully!\e[0m" + fi + + # 风格化 + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[3/3] 正在风格化...\e[0m" + else + color_output "\e[34m[3/3] Stylizing...\e[0m" + fi + curl -o /www/luci-static/argon/iconfont.ttf https://script.kejizero.online/Customize/argon/iconfont.ttf + curl -o /www/luci-static/argon/iconfont.woff https://script.kejizero.online/Customize/argon/iconfont.woff + curl -o /www/luci-static/argon/iconfont.woff2 https://script.kejizero.online/Customize/argon/iconfont.woff2 + chmod -R 777 /www/luci-static/argon/iconfont.ttf + chmod -R 777 /www/luci-static/argon/iconfont.woff + chmod -R 777 /www/luci-static/argon/iconfont.woff2 + curl -s https://script.kejizero.online/Customize/argon/easeicon.css >> /www/luci-static/argon/css/cascade.css + sed -i 's|https://www.istoreos.com/|https://www.kejizero.online/|' /www/luci-static/quickstart/index.js + sed -i 's/iStoreOS/探索无限/' /www/luci-static/quickstart/index.js + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回主菜单..." || echo "Press Enter to return to main menu...")" + show_menu +} + +# 11. 系统信息查询 +system_info() { + while true; do + clear + color_output "\e[38;5;39m+==== 系统信息查询 ====+\e[0m" + echo "" + color_output "\e[38;5;39m1)\e[0m \e[1;97m主机信息\e[0m" + color_output "\e[38;5;39m2)\e[0m \e[1;97m内存信息\e[0m" + color_output "\e[38;5;39m3)\e[0m \e[1;97m磁盘信息\e[0m" + color_output "\e[38;5;39m4)\e[0m \e[1;97m网络信息\e[0m" + color_output "\e[38;5;39m6)\e[0m \e[1;97m显示全部信息\e[0m" + color_output "\e[38;5;39m0)\e[0m \e[1;97m返回主菜单\e[0m" + echo "" + read -p "请选择要查看的信息 [0-6]: " choice + + case $choice in + 1) show_host_info ;; + 2) show_memory_info ;; + 3) show_disk_info ;; + 4) show_network_info ;; + 5) show_all_info ;; + 0) # 返回主菜单 + clear + show_menu + return + ;; + *) # 无效选项 + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m无效选项，请重新输入。\e[0m" + else + color_output "\e[31mInvalid option, please try again.\e[0m" + fi + sleep 2 + continue + ;; + esac + done +} + +# 显示主机信息 +show_host_info() { + clear + color_output "\e[38;5;39m+---- [ 系统信息 ] ----+\e[0m" + + local hostname=$(cat /proc/sys/kernel/hostname 2>/dev/null || echo "Unknown") + local os_version=$(cat /etc/openwrt_release | grep DISTRIB_DESCRIPTION | cut -d "'" -f 2) + local kernel_version=$(uname -r) + local uptime=$(cat /proc/uptime | awk '{printf "%d天%d小时%d分钟", $1/86400, ($1%86400)/3600, ($1%3600)/60}') + local cpu_load=$(cat /proc/loadavg | awk '{print $1", "$2", "$3}') + + color_output "\e[38;5;39m|\e[0m \e[1;97m主机名\e[0m : \e[38;5;220m$hostname\e[0m" + color_output "\e[38;5;39m|\e[0m \e[1;97m系统版本\e[0m : \e[38;5;220m$os_version\e[0m" + color_output "\e[38;5;39m|\e[0m \e[1;97m内核版本\e[0m : \e[38;5;220m$kernel_version\e[0m" + color_output "\e[38;5;39m|\e[0m \e[1;97m运行时间\e[0m : \e[38;5;220m$uptime\e[0m" + + if command -v lscpu &> /dev/null; then + local cpu_arch=$(lscpu | grep 'Architecture' | awk '{print $2}') + local cpu_model=$(lscpu | grep 'Model name' | cut -d ':' -f 2 | sed 's/^[ \t]*//' | tr -s ' ') + local cpu_cores=$(lscpu | grep 'CPU(s):' | head -n 1 | awk '{print $2}') + local cpu_threads=$(lscpu | grep 'Thread(s) per core' | awk '{print $4}') + local cpu_max_mhz=$(lscpu | grep 'CPU max MHz' | awk '{print $4}') + + color_output "\e[38;5;39m|\e[0m \e[1;97mCPU架构\e[0m : \e[38;5;220m$cpu_arch\e[0m" + color_output "\e[38;5;39m|\e[0m \e[1;97mCPU型号\e[0m : \e[38;5;220m$cpu_model\e[0m" + color_output "\e[38;5;39m|\e[0m \e[1;97mCPU核心\e[0m : \e[38;5;220m$cpu_cores 核心 $cpu_threads 线程\e[0m" + [ -n "$cpu_max_mhz" ] && color_output "\e[38;5;39m|\e[0m \e[1;97m最大频率\e[0m : \e[38;5;220m$cpu_max_mhz MHz\e[0m" + else + color_output "\e[38;5;39m|\e[0m \e[1;97mCPU信息\e[0m : \e[38;5;220m$(cat /proc/cpuinfo | grep 'model name' | head -n 1 | cut -d ':' -f 2 | sed 's/^[ \t]*//')\e[0m" + fi + + color_output "\e[38;5;39m|\e[0m \e[1;97mCPU负载\e[0m : \e[38;5;220m$cpu_load\e[0m" + color_output "\e[38;5;39m+-------------------+\e[0m" + read -p "按 Enter 键继续..." +} + +# 显示内存信息 +show_memory_info() { + clear + color_output "\e[38;5;39m+---- [ 内存信息 ] ----+\e[0m" + free -m | grep -v "Swap" | while read line; do + color_output "\e[38;5;39m|\e[0m \e[38;5;220m$line\e[0m" + done + color_output "\e[38;5;39m+-------------------+\e[0m" + read -p "按 Enter 键继续..." +} + +# 显示磁盘信息 +show_disk_info() { + clear + color_output "\e[38;5;39m+---- [ 磁盘信息 ] ----+\e[0m" + df -h | grep -v "tmpfs" | while read line; do + color_output "\e[38;5;39m|\e[0m \e[38;5;220m$line\e[0m" + done + color_output "\e[38;5;39m+-------------------+\e[0m" + read -p "按 Enter 键继续..." +} + +# 显示网络信息 +show_network_info() { + clear + color_output "\e[38;5;39m+---- [ 网络信息 ] ----+\e[0m" + + local lan_ip=$(uci get network.lan.ipaddr 2>/dev/null || ip addr show br-lan | grep -w inet | awk '{print $2}' | cut -d/ -f1) + local gateway=$(ip route | grep default | awk '{print $3}') + local dns_servers=$(cat /tmp/resolv.conf.auto 2>/dev/null | grep nameserver | awk '{print $2}' | tr '\n' ' ' || echo "Unknown") + + color_output "\e[38;5;39m|\e[0m \e[1;97mIP地址\e[0m : \e[38;5;220m$lan_ip\e[0m" + color_output "\e[38;5;39m|\e[0m \e[1;97m网关\e[0m : \e[38;5;220m$gateway\e[0m" + color_output "\e[38;5;39m|\e[0m \e[1;97mDNS\e[0m : \e[38;5;220m$dns_servers\e[0m" + + if command -v ethtool &> /dev/null; then + color_output "\e[38;5;39m+---- [ 网卡状态 ] ----+\e[0m" + ip -o link show | awk -F': ' '{print $2}' | grep -v "lo" | while read iface; do + if [[ "$iface" != *"@"* ]]; then + local mac=$(ip link show $iface 2>/dev/null | grep -oE 'link/ether ([0-9a-fA-F:]{17})' | awk '{print $2}') + local link=$(ethtool $iface 2>/dev/null | grep -i "Link detected" | awk '{print $3}') + local speed=$(ethtool $iface 2>/dev/null | grep -i speed | awk '{print $2}') + local duplex=$(ethtool $iface 2>/dev/null | grep -i duplex | awk '{print $2}') + + color_output "\e[38;5;39m|\e[0m \e[1;97m接口\e[0m : \e[38;5;220m$iface\e[0m" + [ -n "$mac" ] && color_output "\e[38;5;39m|\e[0m \e[1;97mMAC\e[0m : \e[38;5;220m$mac\e[0m" + [ -n "$link" ] && color_output "\e[38;5;39m|\e[0m \e[1;97m状态\e[0m : \e[38;5;220m$link\e[0m" + [ -n "$speed" ] && [ "$speed" != "Unknown!" ] && color_output "\e[38;5;39m|\e[0m \e[1;97m速度\e[0m : \e[38;5;220m$speed\e[0m" + [ -n "$duplex" ] && [ "$duplex" != "Unknown!" ] && color_output "\e[38;5;39m|\e[0m \e[1;97m双工\e[0m : \e[38;5;220m$duplex\e[0m" + fi + done + fi + color_output "\e[38;5;39m+-------------------+\e[0m" + read -p "按 Enter 键继续..." +} + +# 显示所有信息 +show_all_info() { + show_host_info + show_memory_info + show_disk_info + show_network_info +} + +# 12. 检测更新 +check_update() { + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[34m[检测更新]\e[0m" + color_output "正在检查更新..." + else + color_output "\e[34m[Check for Updates]\e[0m" + color_output "Checking for updates..." + fi + + # 检查 wget 是否安装 + if ! command -v wget >/dev/null 2>&1; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m正在安装 wget...\e[0m" + else + color_output "\e[33mInstalling wget...\e[0m" + fi + opkg update && opkg install wget + fi + + # 创建临时目录 + local temp_dir="/tmp/zerowrt_update" + mkdir -p "$temp_dir" + + # 下载远程版本文件 + if ! wget -q "https://git.kejizero.online/zhao/files/raw/branch/main/bin/version.txt" -O "$temp_dir/version.txt"; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m无法连接到更新服务器。\e[0m" + else + color_output "\e[31mFailed to connect to update server.\e[0m" + fi + rm -rf "$temp_dir" + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回菜单..." || echo "Press Enter to return to menu...")" + show_menu + return + fi + + # 获取本地版本和远程版本 + local_version=$(cat /root/version.txt 2>/dev/null || echo "0") + remote_version=$(cat "$temp_dir/version.txt" 2>/dev/null || echo "0") + + # 比较版本 + if [ "$local_version" != "$remote_version" ]; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[33m发现新版本：$remote_version\e[0m" + color_output "\e[33m当前版本：$local_version\e[0m" + read -p "是否更新到最新版本？(y/n): " confirm + else + color_output "\e[33mNew version available: $remote_version\e[0m" + color_output "\e[33mCurrent version: $local_version\e[0m" + read -p "Update to the latest version? (y/n): " confirm + fi + if [[ "$confirm" == "y" || "$confirm" == "Y" ]]; then + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "开始下载更新..." + else + color_output "Downloading update..." + fi + + # 下载新版本到临时文件 + if wget -q "https://git.kejizero.online/zhao/files/raw/branch/main/bin/ZeroWrt" -O "$temp_dir/ZeroWrt.new"; then + # 检查文件是否为有效的 shell 脚本 + if head -n1 "$temp_dir/ZeroWrt.new" | grep -q "^#!/bin/bash"; then + # 备份当前版本 + cp /bin/ZeroWrt /bin/ZeroWrt.bak 2>/dev/null + + # 安装新版本 + mv "$temp_dir/ZeroWrt.new" /bin/ZeroWrt + chmod +x /bin/ZeroWrt + + # 更新版本文件 + echo "$remote_version" > /root/version.txt + + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32m更新成功！\e[0m" + color_output "\e[32m已备份原版本为 /bin/ZeroWrt.bak\e[0m" + color_output "\e[32m请重新运行脚本以应用更新。\e[0m" + else + color_output "\e[32mUpdate successful!\e[0m" + color_output "\e[32mOriginal version backed up as /bin/ZeroWrt.bak\e[0m" + color_output "\e[32mPlease rerun the script to apply updates.\e[0m" + fi + + # 清理并退出 + rm -rf "$temp_dir" + exit 0 + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m下载的文件格式不正确。\e[0m" + else + color_output "\e[31mDownloaded file is not a valid script.\e[0m" + fi + fi + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m更新下载失败。\e[0m" + else + color_output "\e[31mUpdate download failed.\e[0m" + fi + fi + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32m已取消更新。\e[0m" + else + color_output "\e[32mUpdate cancelled.\e[0m" + fi + fi + else + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[32m当前已是最新版本：$local_version\e[0m" + else + color_output "\e[32mAlready up to date: $local_version\e[0m" + fi + fi + + # 清理临时文件 + rm -rf "$temp_dir" + read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回菜单..." || echo "Press Enter to return to menu...")" + show_menu +} + +# 主程序 +select_language +show_agreement +print_header +show_menu