diff --git a/bin/ZeroWrt b/bin/ZeroWrt index 3d9e687..f355012 100644 --- a/bin/ZeroWrt +++ b/bin/ZeroWrt @@ -166,10 +166,12 @@ show_menu() { color_output "\e[36m┃\e[0m 4. 恢复出厂设置 \e[36m┃\e[0m" color_output "\e[36m┃\e[0m 5. 一键换源 \e[36m┃\e[0m" color_output "\e[36m┃\e[0m 6. 一键部署 \e[36m┃\e[0m" - color_output "\e[36m┃\e[0m 7. 一键加载驱动 \e[36m┃\e[0m" - color_output "\e[36m┃\e[0m 8. IPv6 开关 (仅适用于主路由) \e[36m┃\e[0m" - color_output "\e[36m┃\e[0m 9. iStoreOS 风格化 \e[36m┃\e[0m" - color_output "\e[36m┃\e[0m 10. 检测更新 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 7. 一键加载驱动 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 8. IPv6 配置向导 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 9. 网络模式配置向导 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 10. iStoreOS 风格化 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 11. 系统信息查询 \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 12. 检测更新 \e[36m┃\e[0m" color_output "\e[36m┃\e[0m 0. 退出 \e[36m┃\e[0m" color_output "\e[36m┃ ┃\e[0m" color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" @@ -183,10 +185,12 @@ show_menu() { color_output "\e[36m┃\e[0m 4. Factory Reset \e[36m┃\e[0m" color_output "\e[36m┃\e[0m 5. Change Software Sources \e[36m┃\e[0m" color_output "\e[36m┃\e[0m 6. One-click Deployment \e[36m┃\e[0m" - color_output "\e[36m┃\e[0m 7. One-click loading of drivers \e[36m┃\e[0m" - color_output "\e[36m┃\e[0m 8. IPv6 Toggle (Main Router Only) \e[36m┃\e[0m" - color_output "\e[36m┃\e[0m 9. iStoreOS Styling \e[36m┃\e[0m" - color_output "\e[36m┃\e[0m 10. Check for Updates \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 7. One-click loading of drivers \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 8. IPv6-Wizard \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 9. network_mode_wizard \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 10. iStoreOS Styling \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 11. System information query \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 12. Check for Updates \e[36m┃\e[0m" color_output "\e[36m┃\e[0m 0. Exit \e[36m┃\e[0m" color_output "\e[36m┃ ┃\e[0m" color_output "\e[36m┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛\e[0m" @@ -201,9 +205,11 @@ show_menu() { 5) change_source ;; 6) install_apps ;; 7) Load_driver ;; - 8) configure_ipv6 ;; - 9) istore_style ;; - 10) check_update ;; + 8) ipv6_wizard ;; + 9) network_mode_wizard ;; + 10) istore_style ;; + 11) system_info ;; + 12) check_update ;; 0) exit 0 ;; *) if [[ "$LANG_CHOICE" == "zh" ]]; then @@ -475,7 +481,7 @@ install_apps() { color_output "\e[36m┃\e[0m 2. Deploy XiaoYa Alist \e[36m┃\e[0m" color_output "\e[36m┃\e[0m 3. Deploy Subconverter \e[36m┃\e[0m" color_output "\e[36m┃\e[0m 4. Deploy AdGuardhome \e[36m┃\e[0m" - color_output "\e[36m┃\e[0m 5. Deploy Gitea-PostgreSQL \e[36m┃\e[0m" + color_output "\e[36m┃\e[0m 5. Gitea-PostgreSQL \e[36m┃\e[0m" color_output "\e[36m┃\e[0m 6. Deploy SunPanel \e[36m┃\e[0m" color_output "\e[36m┃\e[0m 0. Back to Main Menu \e[36m┃\e[0m" color_output "\e[36m┃ ┃\e[0m" @@ -732,7 +738,7 @@ install_apps() { # 检查 Gitea 容器是否已存在 if docker ps -a | grep -q "gitea"; then if [[ "$LANG_CHOICE" == "zh" ]]; then - color_output "\e[33mGitea-PostgreSQL 已经部署过，跳过部署！\e[0m" + color_output "\e[33mGitea-MySQL 已经部署过，跳过部署！\e[0m" else color_output "\e[33mGitea-MySQL already deployed, skipping!\e[0m" fi @@ -748,6 +754,7 @@ install_apps() { # 创建目录 mkdir -p /opt/Gitea + mkdir -p /opt/MySQL # 下载 Docker Compose 文件到 /opt/gitea curl -L https://git.kejizero.online/zhao/docker-compose/raw/branch/main/Gitea -o /opt/Gitea/docker-compose.yml @@ -871,7 +878,6 @@ install_apps() { done } # 7. 加载驱动 -# 7. 一键加载所有驱动 Load_driver() { while true; do clear @@ -1232,30 +1238,12 @@ Load_driver() { done } -# 8. IPv6 开关 -configure_ipv6() { - if [[ "$LANG_CHOICE" == "zh" ]]; then - color_output "\e[34m[IPv6 设置]\e[0m" - else - color_output "\e[34m[IPv6 Settings]\e[0m" - fi - - # 检查是否为 PPPoE 模式 - local wan_proto=$(uci -q get network.wan.proto) - if [ "$wan_proto" != "pppoe" ]; then - if [[ "$LANG_CHOICE" == "zh" ]]; then - color_output "\e[31m错误: 无法开启 IPv6\e[0m" - color_output "\e[31m当前上网方式为: $wan_proto\e[0m" - color_output "\e[31m请先切换为 PPPoE 模式\e[0m" - else - color_output "\e[31mError: Cannot enable IPv6\e[0m" - color_output "\e[31mCurrent connection type: $wan_proto\e[0m" - color_output "\e[31mPlease switch to PPPoE mode first\e[0m" - fi - read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回菜单..." || echo "Press Enter to return to menu...")" - show_menu - return - fi +# 8. IPv6 配置向导 +ipv6_wizard() { + echo + echo + echo + color_output "\e[34m[IPv6 配置向导]\e[0m" "\e[34m[IPv6 Configuration Wizard]\e[0m" # 检查当前状态 local current_ra=$(uci -q get dhcp.lan.ra) @@ -1265,111 +1253,538 @@ configure_ipv6() { if [ "$current_ra" = "server" ] && [ "$current_dhcpv6" = "server" ]; then status_text=$([[ "$LANG_CHOICE" == "zh" ]] && echo "已开启" || echo "Enabled") + status_color="\e[32m" else status_text=$([[ "$LANG_CHOICE" == "zh" ]] && echo "已关闭" || echo "Disabled") + status_color="\e[31m" fi - if [[ "$LANG_CHOICE" == "zh" ]]; then - color_output "\e[36m当前 IPv6 状态: $status_text\e[0m" - color_output "\e[36m请选择操作：\e[0m" - color_output "1. 开启 IPv6" - color_output "2. 关闭 IPv6" - color_output "0. 返回主菜单" - else - color_output "\e[36mCurrent IPv6 Status: $status_text\e[0m" - color_output "\e[36mSelect operation:\e[0m" - color_output "1. Enable IPv6" - color_output "2. Disable IPv6" - color_output "0. Back to Main Menu" + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "当前 IPv6 状态:"; else echo "Current IPv6 Status:"; fi) $status_color$status_text\e[0m" + + # 检查是否为 PPPoE 模式 + local wan_proto=$(uci -q get network.wan.proto) + if [ "$wan_proto" != "pppoe" ]; then + color_output "\e[33m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "注意: 当前上网方式为 $wan_proto，建议使用 PPPoE 模式获取 IPv6"; else echo "Note: Current connection type is $wan_proto, PPPoE is recommended for IPv6"; fi)\e[0m" fi - read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "请输入选择 [0-2]: " || echo "Enter your choice [0-2]: ")" ipv6_choice + echo + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请选择操作："; else echo "Select operation:"; fi)\e[0m" + color_output "1. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "开启 IPv6 功能"; else echo "Enable IPv6"; fi)" + color_output "2. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "关闭 IPv6 功能"; else echo "Disable IPv6"; fi)" + color_output "3. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "高级 IPv6 设置"; else echo "Advanced IPv6 Settings"; fi)" + color_output "0. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "返回IPv6 配置向导"; else echo "Back to Wizard"; fi)" + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入选择 [0-3]: "; else echo "Enter your choice [0-3]: "; fi)" ipv6_choice case "$ipv6_choice" in 1) # 开启 IPv6 - # RA 服务设置为服务模式 - uci set dhcp.lan.ra='server' - # DHCPv6 服务设置为服务模式 - uci set dhcp.lan.dhcpv6='server' - # IPv6 分配长度设置为64 - uci set dhcp.lan.ndp='64' - # 取消过滤 IPv6 AAAA 记录 - uci set dhcp.@dnsmasq[0].filter_aaaa='0' - # 保存设置 - uci commit dhcp - - # 重启相关服务（重定向输出） - /etc/init.d/odhcpd restart >/dev/null 2>&1 - /etc/init.d/dnsmasq restart >/dev/null 2>&1 - - if [[ "$LANG_CHOICE" == "zh" ]]; then - color_output "\e[32mIPv6 已开启！\e[0m" - color_output "\e[32m- RA 服务: 服务模式\e[0m" - color_output "\e[32m- DHCPv6 服务: 服务模式\e[0m" - color_output "\e[32m- IPv6 分配长度: 64\e[0m" - color_output "\e[32m- IPv6 AAAA 记录过滤: 已关闭\e[0m" - else - color_output "\e[32mIPv6 enabled!\e[0m" - color_output "\e[32m- RA Service: server\e[0m" - color_output "\e[32m- DHCPv6 Service: server\e[0m" - color_output "\e[32m- IPv6 Prefix Length: 64\e[0m" - color_output "\e[32m- IPv6 AAAA Filtering: disabled\e[0m" - fi + enable_ipv6 ;; - 2) # 关闭 IPv6 - # RA 服务设置为已禁用 - uci set dhcp.lan.ra='disabled' - # DHCPv6 服务设置为已禁用 - uci set dhcp.lan.dhcpv6='disabled' - # IPv6 分配长度设置为已禁用 - uci set dhcp.lan.ndp='disabled' - # 开启过滤 IPv6 AAAA 记录 - uci set dhcp.@dnsmasq[0].filter_aaaa='1' - # 保存设置 - uci commit dhcp - - # 重启相关服务（重定向输出） - /etc/init.d/odhcpd restart >/dev/null 2>&1 - /etc/init.d/dnsmasq restart >/dev/null 2>&1 - - if [[ "$LANG_CHOICE" == "zh" ]]; then - color_output "\e[32mIPv6 已关闭！\e[0m" - color_output "\e[32m- RA 服务: 已禁用\e[0m" - color_output "\e[32m- DHCPv6 服务: 已禁用\e[0m" - color_output "\e[32m- IPv6 分配长度: 已禁用\e[0m" - color_output "\e[32m- IPv6 AAAA 记录过滤: 已开启\e[0m" - else - color_output "\e[32mIPv6 disabled!\e[0m" - color_output "\e[32m- RA Service: disabled\e[0m" - color_output "\e[32m- DHCPv6 Service: disabled\e[0m" - color_output "\e[32m- IPv6 Prefix Length: disabled\e[0m" - color_output "\e[32m- IPv6 AAAA Filtering: enabled\e[0m" - fi + disable_ipv6 + ;; + 3) + # 高级设置 + advanced_ipv6_settings ;; - 0) show_menu return ;; - *) - if [[ "$LANG_CHOICE" == "zh" ]]; then - color_output "\e[31m无效选择\e[0m" - else - color_output "\e[31mInvalid choice\e[0m" - fi + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效选择"; else echo "Invalid choice"; fi)\e[0m" + sleep 1 + ipv6_wizard + return ;; esac - sleep 2 - read -p "$([[ "$LANG_CHOICE" == "zh" ]] && echo "按 Enter 键返回菜单..." || echo "Press Enter to return to menu...")" - show_menu + ipv6_wizard } -# 9. iStoreOS 风格化 +# 启用 IPv6 功能 +enable_ipv6() { + # RA 服务设置为服务模式 + uci set dhcp.lan.ra='server' + # DHCPv6 服务设置为服务模式 + uci set dhcp.lan.dhcpv6='server' + # IPv6 分配长度设置为64 + uci set dhcp.lan.ndp='64' + # 取消过滤 IPv6 AAAA 记录 + uci set dhcp.@dnsmasq[0].filter_aaaa='0' + # 保存设置 + uci commit dhcp + + # 重启相关服务 + /etc/init.d/odhcpd restart >/dev/null 2>&1 + /etc/init.d/dnsmasq restart >/dev/null 2>&1 + + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then + echo "IPv6 已开启！" + echo "- RA 服务: 服务模式" + echo "- DHCPv6 服务: 服务模式" + echo "- IPv6 分配长度: 64" + echo "- IPv6 AAAA 记录过滤: 已关闭" + else + echo "IPv6 enabled!" + echo "- RA Service: server" + echo "- DHCPv6 Service: server" + echo "- IPv6 Prefix Length: 64" + echo "- IPv6 AAAA Filtering: disabled" + fi)\e[0m" +} + +# 禁用 IPv6 功能 +disable_ipv6() { + # RA 服务设置为已禁用 + uci set dhcp.lan.ra='disabled' + # DHCPv6 服务设置为已禁用 + uci set dhcp.lan.dhcpv6='disabled' + # IPv6 分配长度设置为已禁用 + uci set dhcp.lan.ndp='disabled' + # 开启过滤 IPv6 AAAA 记录 + uci set dhcp.@dnsmasq[0].filter_aaaa='1' + # 保存设置 + uci commit dhcp + + # 重启相关服务 + /etc/init.d/odhcpd restart >/dev/null 2>&1 + /etc/init.d/dnsmasq restart >/dev/null 2>&1 + + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then + echo "IPv6 已关闭！" + echo "- RA 服务: 已禁用" + echo "- DHCPv6 服务: 已禁用" + echo "- IPv6 分配长度: 已禁用" + echo "- IPv6 AAAA 记录过滤: 已开启" + else + echo "IPv6 disabled!" + echo "- RA Service: disabled" + echo "- DHCPv6 Service: disabled" + echo "- IPv6 Prefix Length: disabled" + echo "- IPv6 AAAA Filtering: enabled" + fi)\e[0m" +} + +# 高级 IPv6 设置 +advanced_ipv6_settings() { + echo + color_output "\e[34m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "[高级 IPv6 设置]"; else echo "[Advanced IPv6 Settings]"; fi)\e[0m" + + # 获取当前设置 + local current_ra=$(uci -q get dhcp.lan.ra) + local current_dhcpv6=$(uci -q get dhcp.lan.dhcpv6) + local current_ndp=$(uci -q get dhcp.lan.ndp) + local current_filter_aaaa=$(uci -q get dhcp.@dnsmasq[0].filter_aaaa) + + # 显示当前设置 + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "当前设置："; else echo "Current settings:"; fi)\e[0m" + color_output "1. RA: $current_ra" + color_output "2. DHCPv6: $current_dhcpv6" + color_output "3. NDP: $current_ndp" + color_output "4. Filter AAAA: $current_filter_aaaa" + + echo + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请选择要修改的选项："; else echo "Select option to modify:"; fi)\e[0m" + color_output "1. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置 RA 服务"; else echo "Configure RA service"; fi)" + color_output "2. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置 DHCPv6 服务"; else echo "Configure DHCPv6 service"; fi)" + color_output "3. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置 IPv6 前缀长度"; else echo "Configure IPv6 prefix length"; fi)" + color_output "4. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置 AAAA 记录过滤"; else echo "Configure AAAA record filtering"; fi)" + color_output "0. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "返回"; else echo "Back"; fi)" + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入选择 [0-4]: "; else echo "Enter your choice [0-4]: "; fi)" advanced_choice + + case "$advanced_choice" in + 1) + configure_ra_service + ;; + 2) + configure_dhcpv6_service + ;; + 3) + configure_ndp + ;; + 4) + configure_aaaa_filter + ;; + 0) + return + ;; + *) + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效选择"; else echo "Invalid choice"; fi)\e[0m" + ;; + esac + + # 保存并应用更改 + uci commit dhcp + /etc/init.d/odhcpd restart >/dev/null 2>&1 + /etc/init.d/dnsmasq restart >/dev/null 2>&1 + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "按 Enter 键继续..."; else echo "Press Enter to continue..."; fi)" + advanced_ipv6_settings +} + +# 配置 RA 服务 +configure_ra_service() { + echo + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "RA 服务选项："; else echo "RA Service Options:"; fi)\e[0m" + color_output "1. server - $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "作为 RA 服务器"; else echo "Act as RA server"; fi)" + color_output "2. relay - $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "作为 RA 中继"; else echo "Act as RA relay"; fi)" + color_output "3. disabled - $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "禁用 RA 服务"; else echo "Disable RA service"; fi)" + color_output "0. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "取消"; else echo "Cancel"; fi)" + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请选择 RA 服务模式: "; else echo "Select RA service mode: "; fi)" ra_mode + + case "$ra_mode" in + 1) + uci set dhcp.lan.ra='server' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "RA 服务已设置为服务器模式"; else echo "RA service set to server mode"; fi)\e[0m" + ;; + 2) + uci set dhcp.lan.ra='relay' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "RA 服务已设置为中继模式"; else echo "RA service set to relay mode"; fi)\e[0m" + ;; + 3) + uci set dhcp.lan.ra='disabled' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "RA 服务已禁用"; else echo "RA service disabled"; fi)\e[0m" + ;; + 0) + return + ;; + *) + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效选择"; else echo "Invalid choice"; fi)\e[0m" + ;; + esac +} + +# 配置 DHCPv6 服务 +configure_dhcpv6_service() { + echo + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "DHCPv6 服务选项："; else echo "DHCPv6 Service Options:"; fi)\e[0m" + color_output "1. server - $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "作为 DHCPv6 服务器"; else echo "Act as DHCPv6 server"; fi)" + color_output "2. relay - $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "作为 DHCPv6 中继"; else echo "Act as DHCPv6 relay"; fi)" + color_output "3. disabled - $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "禁用 DHCPv6 服务"; else echo "Disable DHCPv6 service"; fi)" + color_output "0. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "取消"; else echo "Cancel"; fi)" + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请选择 DHCPv6 服务模式: "; else echo "Select DHCPv6 service mode: "; fi)" dhcpv6_mode + + case "$dhcpv6_mode" in + 1) + uci set dhcp.lan.dhcpv6='server' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "DHCPv6 服务已设置为服务器模式"; else echo "DHCPv6 service set to server mode"; fi)\e[0m" + ;; + 2) + uci set dhcp.lan.dhcpv6='relay' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "DHCPv6 服务已设置为中继模式"; else echo "DHCPv6 service set to relay mode"; fi)\e[0m" + ;; + 3) + uci set dhcp.lan.dhcpv6='disabled' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "DHCPv6 服务已禁用"; else echo "DHCPv6 service disabled"; fi)\e[0m" + ;; + 0) + return + ;; + *) + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效选择"; else echo "Invalid choice"; fi)\e[0m" + ;; + esac +} + +# 配置 NDP +configure_ndp() { + echo + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入 IPv6 前缀长度 (默认 64): "; else echo "Enter IPv6 prefix length (default 64): "; fi)" prefix_length + + if [[ -z "$prefix_length" ]]; then + prefix_length="64" + fi + + if [[ "$prefix_length" =~ ^[0-9]+$ ]] && [ "$prefix_length" -ge 48 ] && [ "$prefix_length" -le 128 ]; then + uci set dhcp.lan.ndp="$prefix_length" + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "IPv6 前缀长度已设置为 $prefix_length"; else echo "IPv6 prefix length set to $prefix_length"; fi)\e[0m" + else + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效的前缀长度 (48-128)"; else echo "Invalid prefix length (48-128)"; fi)\e[0m" + fi +} + +# 配置 AAAA 记录过滤 +configure_aaaa_filter() { + echo + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "AAAA 记录过滤选项："; else echo "AAAA Record Filtering Options:"; fi)\e[0m" + color_output "1. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "启用 AAAA 记录过滤"; else echo "Enable AAAA record filtering"; fi)" + color_output "2. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "禁用 AAAA 记录过滤"; else echo "Disable AAAA record filtering"; fi)" + color_output "0. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "取消"; else echo "Cancel"; fi)" + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请选择: "; else echo "Select option: "; fi)" aaaa_choice + + case "$aaaa_choice" in + 1) + uci set dhcp.@dnsmasq[0].filter_aaaa='1' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "AAAA 记录过滤已启用"; else echo "AAAA record filtering enabled"; fi)\e[0m" + ;; + 2) + uci set dhcp.@dnsmasq[0].filter_aaaa='0' + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "AAAA 记录过滤已禁用"; else echo "AAAA record filtering disabled"; fi)\e[0m" + ;; + 0) + return + ;; + *) + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效选择"; else echo "Invalid choice"; fi)\e[0m" + ;; + esac +} + +# 9. 网络模式配置向导 +network_mode_wizard() { + echo + color_output "\e[34m[网络模式配置向导]\e[0m" "\e[34m[Network Mode Configuration Wizard]\e[0m" + + # 获取当前WAN口配置 + local current_proto=$(uci -q get network.wan.proto) + local current_username=$(uci -q get network.wan.username) + local current_ipaddr=$(uci -q get network.lan.ipaddr) + + # 显示当前配置 + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "当前网络配置："; else echo "Current network configuration:"; fi)\e[0m" + color_output "1. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "连接模式:"; else echo "Connection mode:"; fi) $current_proto" + + if [ "$current_proto" == "pppoe" ]; then + color_output "2. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "PPPoE账号:"; else echo "PPPoE username:"; fi) $current_username" + fi + + color_output "3. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "LAN IP地址:"; else echo "LAN IP address:"; fi) $current_ipaddr" + + echo + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请选择操作："; else echo "Select operation:"; fi)\e[0m" + color_output "1. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置PPPoE拨号"; else echo "Configure PPPoE"; fi)" + color_output "2. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置DHCP客户端"; else echo "Configure DHCP client"; fi)" + color_output "3. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置静态IP"; else echo "Configure static IP"; fi)" + color_output "4. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "高级网络设置"; else echo "Advanced network settings"; fi)" + color_output "0. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "返回主菜单"; else echo "Back to Main Menu"; fi)" + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入选择 [0-4]: "; else echo "Enter your choice [0-4]: "; fi)" mode_choice + + case "$mode_choice" in + 1) + configure_pppoe + ;; + 2) + configure_dhcp_client + ;; + 3) + configure_static_ip + ;; + 4) + advanced_network_settings + ;; + 0) + show_menu + return + ;; + *) + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效选择"; else echo "Invalid choice"; fi)\e[0m" + ;; + esac + + # 应用网络配置 + uci commit network + /etc/init.d/network restart + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "按Enter键返回网络向导..."; else echo "Press Enter to return to network wizard..."; fi)" + network_mode_wizard +} + +# 配置PPPoE拨号 +configure_pppoe() { + echo + color_output "\e[34m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "[PPPoE配置]"; else echo "[PPPoE Configuration]"; fi)\e[0m" + + # 获取当前PPPoE配置 + local current_username=$(uci -q get network.wan.username) + local current_password=$(uci -q get network.wan.password) + + # 显示当前配置（隐藏密码） + if [ -n "$current_username" ]; then + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "当前PPPoE账号:"; else echo "Current PPPoE username:"; fi) $current_username\e[0m" + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "当前PPPoE密码:"; else echo "Current PPPoE password:"; fi) ********\e[0m" + else + color_output "\e[33m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "未配置PPPoE"; else echo "PPPoE not configured"; fi)\e[0m" + fi + + echo + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入PPPoE账号(留空保持不变): "; else echo "Enter PPPoE username (leave blank to keep current): "; fi)" pppoe_username + read -s -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入PPPoE密码(留空保持不变): "; else echo "Enter PPPoE password (leave blank to keep current): "; fi)" pppoe_password + echo + + # 设置PPPoE配置 + uci set network.wan.proto='pppoe' + [ -n "$pppoe_username" ] && uci set network.wan.username="$pppoe_username" + [ -n "$pppoe_password" ] && uci set network.wan.password="$pppoe_password" + + # 设置MTU和MRU（优化PPPoE连接） + uci set network.wan.mtu='1492' + uci set network.wan.mru='1492' + + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "PPPoE配置已更新！"; else echo "PPPoE configuration updated!"; fi)\e[0m" + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "连接模式已设置为PPPoE"; else echo "Connection mode set to PPPoE"; fi)\e[0m" +} + +# 配置DHCP客户端 +configure_dhcp_client() { + echo + color_output "\e[34m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "[DHCP客户端配置]"; else echo "[DHCP Client Configuration]"; fi)\e[0m" + + # 设置DHCP客户端 + uci set network.wan.proto='dhcp' + + # 清除PPPoE配置（如果存在） + uci delete network.wan.username >/dev/null 2>&1 + uci delete network.wan.password >/dev/null 2>&1 + + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "DHCP客户端配置已更新！"; else echo "DHCP client configuration updated!"; fi)\e[0m" + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "连接模式已设置为DHCP客户端"; else echo "Connection mode set to DHCP client"; fi)\e[0m" +} + +# 配置静态IP +configure_static_ip() { + echo + color_output "\e[34m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "[静态IP配置]"; else echo "[Static IP Configuration]"; fi)\e[0m" + + # 获取当前配置 + local current_ip=$(uci -q get network.wan.ipaddr) + local current_netmask=$(uci -q get network.wan.netmask) + local current_gateway=$(uci -q get network.wan.gateway) + local current_dns=$(uci -q get network.wan.dns) + + # 显示当前配置 + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "当前静态IP配置："; else echo "Current static IP configuration:"; fi)\e[0m" + color_output "1. IP地址: ${current_ip:-未设置}" + color_output "2. 子网掩码: ${current_netmask:-未设置}" + color_output "3. 网关: ${current_gateway:-未设置}" + color_output "4. DNS服务器: ${current_dns:-未设置}" + + echo + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入IP地址: "; else echo "Enter IP address: "; fi)" static_ip + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入子网掩码(默认255.255.255.0): "; else echo "Enter netmask (default 255.255.255.0): "; fi)" static_netmask + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入网关: "; else echo "Enter gateway: "; fi)" static_gateway + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入DNS服务器(多个用空格分隔): "; else echo "Enter DNS servers (separate with spaces): "; fi)" static_dns + + # 设置默认值 + [ -z "$static_netmask" ] && static_netmask="255.255.255.0" + + # 验证输入 + if ! [[ $static_ip =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}$ ]] || + ! [[ $static_netmask =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}$ ]] || + ! [[ $static_gateway =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}$ ]]; then + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效的IP地址、子网掩码或网关"; else echo "Invalid IP address, netmask or gateway"; fi)\e[0m" + return + fi + + # 设置静态IP配置 + uci set network.wan.proto='static' + uci set network.wan.ipaddr="$static_ip" + uci set network.wan.netmask="$static_netmask" + uci set network.wan.gateway="$static_gateway" + [ -n "$static_dns" ] && uci set network.wan.dns="$static_dns" + + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "静态IP配置已更新！"; else echo "Static IP configuration updated!"; fi)\e[0m" +} + +# 高级网络设置 +advanced_network_settings() { + echo + color_output "\e[34m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "[高级网络设置]"; else echo "[Advanced Network Settings]"; fi)\e[0m" + + # 获取当前MTU和DNS设置 + local current_mtu=$(uci -q get network.wan.mtu) + local current_dns=$(uci -q get network.wan.dns) + local current_hostname=$(uci -q get system.@system[0].hostname) + + # 显示当前设置 + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "当前高级设置："; else echo "Current advanced settings:"; fi)\e[0m" + color_output "1. MTU: ${current_mtu:-默认}" + color_output "2. DNS服务器: ${current_dns:-默认}" + color_output "3. 主机名: ${current_hostname:-默认}" + + echo + color_output "\e[36m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请选择要配置的选项："; else echo "Select option to configure:"; fi)\e[0m" + color_output "1. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置MTU"; else echo "Configure MTU"; fi)" + color_output "2. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置自定义DNS"; else echo "Configure custom DNS"; fi)" + color_output "3. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "配置主机名"; else echo "Configure hostname"; fi)" + color_output "0. $(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "返回"; else echo "Back"; fi)" + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入选择 [0-3]: "; else echo "Enter your choice [0-3]: "; fi)" advanced_choice + + case "$advanced_choice" in + 1) + configure_mtu + ;; + 2) + configure_custom_dns + ;; + 3) + configure_hostname + ;; + 0) + network_mode_wizard + return + ;; + *) + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效选择"; else echo "Invalid choice"; fi)\e[0m" + ;; + esac + + # 保存并应用更改 + uci commit network + uci commit system + + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "按Enter键继续..."; else echo "Press Enter to continue..."; fi)" + advanced_network_settings +} + +# 配置MTU +configure_mtu() { + echo + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入MTU值(默认1500，PPPoE建议1492): "; else echo "Enter MTU value (default 1500, PPPoE recommends 1492): "; fi)" mtu_value + + if [[ "$mtu_value" =~ ^[0-9]+$ ]] && [ "$mtu_value" -ge 576 ] && [ "$mtu_value" -le 1500 ]; then + uci set network.wan.mtu="$mtu_value" + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "MTU已设置为$mtu_value"; else echo "MTU set to $mtu_value"; fi)\e[0m" + else + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效的MTU值(576-1500)"; else echo "Invalid MTU value (576-1500)"; fi)\e[0m" + fi +} + +# 配置自定义DNS +configure_custom_dns() { + echo + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入DNS服务器(多个用空格分隔): "; else echo "Enter DNS servers (separate with spaces): "; fi)" dns_servers + + if [[ $dns_servers =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}(\s+([0-9]{1,3}\.){3}[0-9]{1,3})*$ ]]; then + uci set network.wan.dns="$dns_servers" + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "DNS服务器已更新"; else echo "DNS servers updated"; fi)\e[0m" + else + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "无效的DNS格式"; else echo "Invalid DNS format"; fi)\e[0m" + fi +} + +# 配置主机名 +configure_hostname() { + echo + read -p "$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "请输入主机名: "; else echo "Enter hostname: "; fi)" new_hostname + + if [ -n "$new_hostname" ]; then + uci set system.@system[0].hostname="$new_hostname" + color_output "\e[32m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "主机名已设置为$new_hostname"; else echo "Hostname set to $new_hostname"; fi)\e[0m" + else + color_output "\e[31m$(if [[ "$LANG_CHOICE" == "zh" ]]; then echo "主机名不能为空"; else echo "Hostname cannot be empty"; fi)\e[0m" + fi +} + +# 10. iStoreOS 风格化 istore_style() { clear if [[ "$LANG_CHOICE" == "zh" ]]; then @@ -1425,7 +1840,146 @@ istore_style() { show_menu } -# 10. 检测更新 +# 11. 系统信息查询 +system_info() { + while true; do + clear + color_output "\e[38;5;39m+==== 系统信息查询 ====+\e[0m" + echo "" + color_output "\e[38;5;39m1)\e[0m \e[1;97m主机信息\e[0m" + color_output "\e[38;5;39m2)\e[0m \e[1;97m内存信息\e[0m" + color_output "\e[38;5;39m3)\e[0m \e[1;97m磁盘信息\e[0m" + color_output "\e[38;5;39m4)\e[0m \e[1;97m网络信息\e[0m" + color_output "\e[38;5;39m6)\e[0m \e[1;97m显示全部信息\e[0m" + color_output "\e[38;5;39m0)\e[0m \e[1;97m返回主菜单\e[0m" + echo "" + read -p "请选择要查看的信息 [0-6]: " choice + + case $choice in + 1) show_host_info ;; + 2) show_memory_info ;; + 3) show_disk_info ;; + 4) show_network_info ;; + 5) show_all_info ;; + 0) # 返回主菜单 + clear + show_menu + return + ;; + *) # 无效选项 + if [[ "$LANG_CHOICE" == "zh" ]]; then + color_output "\e[31m无效选项，请重新输入。\e[0m" + else + color_output "\e[31mInvalid option, please try again.\e[0m" + fi + sleep 2 + continue + ;; + esac + done +} + +# 显示主机信息 +show_host_info() { + clear + color_output "\e[38;5;39m+---- [ 系统信息 ] ----+\e[0m" + + local hostname=$(cat /proc/sys/kernel/hostname 2>/dev/null || echo "Unknown") + local os_version=$(cat /etc/openwrt_release | grep DISTRIB_DESCRIPTION | cut -d "'" -f 2) + local kernel_version=$(uname -r) + local uptime=$(cat /proc/uptime | awk '{printf "%d天%d小时%d分钟", $1/86400, ($1%86400)/3600, ($1%3600)/60}') + local cpu_load=$(cat /proc/loadavg | awk '{print $1", "$2", "$3}') + + color_output "\e[38;5;39m|\e[0m \e[1;97m主机名\e[0m : \e[38;5;220m$hostname\e[0m" + color_output "\e[38;5;39m|\e[0m \e[1;97m系统版本\e[0m : \e[38;5;220m$os_version\e[0m" + color_output "\e[38;5;39m|\e[0m \e[1;97m内核版本\e[0m : \e[38;5;220m$kernel_version\e[0m" + color_output "\e[38;5;39m|\e[0m \e[1;97m运行时间\e[0m : \e[38;5;220m$uptime\e[0m" + + if command -v lscpu &> /dev/null; then + local cpu_arch=$(lscpu | grep 'Architecture' | awk '{print $2}') + local cpu_model=$(lscpu | grep 'Model name' | cut -d ':' -f 2 | sed 's/^[ \t]*//' | tr -s ' ') + local cpu_cores=$(lscpu | grep 'CPU(s):' | head -n 1 | awk '{print $2}') + local cpu_threads=$(lscpu | grep 'Thread(s) per core' | awk '{print $4}') + local cpu_max_mhz=$(lscpu | grep 'CPU max MHz' | awk '{print $4}') + + color_output "\e[38;5;39m|\e[0m \e[1;97mCPU架构\e[0m : \e[38;5;220m$cpu_arch\e[0m" + color_output "\e[38;5;39m|\e[0m \e[1;97mCPU型号\e[0m : \e[38;5;220m$cpu_model\e[0m" + color_output "\e[38;5;39m|\e[0m \e[1;97mCPU核心\e[0m : \e[38;5;220m$cpu_cores 核心 $cpu_threads 线程\e[0m" + [ -n "$cpu_max_mhz" ] && color_output "\e[38;5;39m|\e[0m \e[1;97m最大频率\e[0m : \e[38;5;220m$cpu_max_mhz MHz\e[0m" + else + color_output "\e[38;5;39m|\e[0m \e[1;97mCPU信息\e[0m : \e[38;5;220m$(cat /proc/cpuinfo | grep 'model name' | head -n 1 | cut -d ':' -f 2 | sed 's/^[ \t]*//')\e[0m" + fi + + color_output "\e[38;5;39m|\e[0m \e[1;97mCPU负载\e[0m : \e[38;5;220m$cpu_load\e[0m" + color_output "\e[38;5;39m+-------------------+\e[0m" + read -p "按 Enter 键继续..." +} + +# 显示内存信息 +show_memory_info() { + clear + color_output "\e[38;5;39m+---- [ 内存信息 ] ----+\e[0m" + free -m | grep -v "Swap" | while read line; do + color_output "\e[38;5;39m|\e[0m \e[38;5;220m$line\e[0m" + done + color_output "\e[38;5;39m+-------------------+\e[0m" + read -p "按 Enter 键继续..." +} + +# 显示磁盘信息 +show_disk_info() { + clear + color_output "\e[38;5;39m+---- [ 磁盘信息 ] ----+\e[0m" + df -h | grep -v "tmpfs" | while read line; do + color_output "\e[38;5;39m|\e[0m \e[38;5;220m$line\e[0m" + done + color_output "\e[38;5;39m+-------------------+\e[0m" + read -p "按 Enter 键继续..." +} + +# 显示网络信息 +show_network_info() { + clear + color_output "\e[38;5;39m+---- [ 网络信息 ] ----+\e[0m" + + local lan_ip=$(uci get network.lan.ipaddr 2>/dev/null || ip addr show br-lan | grep -w inet | awk '{print $2}' | cut -d/ -f1) + local gateway=$(ip route | grep default | awk '{print $3}') + local dns_servers=$(cat /tmp/resolv.conf.auto 2>/dev/null | grep nameserver | awk '{print $2}' | tr '\n' ' ' || echo "Unknown") + + color_output "\e[38;5;39m|\e[0m \e[1;97mIP地址\e[0m : \e[38;5;220m$lan_ip\e[0m" + color_output "\e[38;5;39m|\e[0m \e[1;97m网关\e[0m : \e[38;5;220m$gateway\e[0m" + color_output "\e[38;5;39m|\e[0m \e[1;97mDNS\e[0m : \e[38;5;220m$dns_servers\e[0m" + + if command -v ethtool &> /dev/null; then + color_output "\e[38;5;39m+---- [ 网卡状态 ] ----+\e[0m" + ip -o link show | awk -F': ' '{print $2}' | grep -v "lo" | while read iface; do + if [[ "$iface" != *"@"* ]]; then + local mac=$(ip link show $iface 2>/dev/null | grep -oE 'link/ether ([0-9a-fA-F:]{17})' | awk '{print $2}') + local link=$(ethtool $iface 2>/dev/null | grep -i "Link detected" | awk '{print $3}') + local speed=$(ethtool $iface 2>/dev/null | grep -i speed | awk '{print $2}') + local duplex=$(ethtool $iface 2>/dev/null | grep -i duplex | awk '{print $2}') + + color_output "\e[38;5;39m|\e[0m \e[1;97m接口\e[0m : \e[38;5;220m$iface\e[0m" + [ -n "$mac" ] && color_output "\e[38;5;39m|\e[0m \e[1;97mMAC\e[0m : \e[38;5;220m$mac\e[0m" + [ -n "$link" ] && color_output "\e[38;5;39m|\e[0m \e[1;97m状态\e[0m : \e[38;5;220m$link\e[0m" + [ -n "$speed" ] && [ "$speed" != "Unknown!" ] && color_output "\e[38;5;39m|\e[0m \e[1;97m速度\e[0m : \e[38;5;220m$speed\e[0m" + [ -n "$duplex" ] && [ "$duplex" != "Unknown!" ] && color_output "\e[38;5;39m|\e[0m \e[1;97m双工\e[0m : \e[38;5;220m$duplex\e[0m" + fi + done + fi + color_output "\e[38;5;39m+-------------------+\e[0m" + read -p "按 Enter 键继续..." +} + +# 显示所有信息 +show_all_info() { + show_host_info + show_memory_info + show_disk_info + show_network_info +} + +# 12. 检测更新 check_update() { if [[ "$LANG_CHOICE" == "zh" ]]; then color_output "\e[34m[检测更新]\e[0m"